Fuel Pump Module, True Variable Speed, 90-Deg Outlet, Brushless Spur 3.5

$1,586.97

-

P/N 18067 Fuel Pump Module, True Variable Speed, 90-Deg Outlet, Brushless Spur 3.5
Pro-Series Performance Plus Advanced Technology

This configuration features a universal filter pickup, for an overall height adjustment from 10-16in.

  • The Pro-Series performance you expect and more:
    • Fuel-injected engines: GAS
      up to 2400 FWHP – naturally-aspirated
      up to 1800 FWHP – forced air induction
    • Carbureted engines: GAS
      Up to 2600 FWHP – naturally-aspirated
      Up to 2000 FWHP – forced air induction
    • Fuel-injected engines: E85
      up to 1680 FWHP – naturally-aspirated
      up to 1260 FWHP – forced air induction
    • Carbureted engines: E85
      Up to 1820 FWHP – naturally-aspirated
      Up to 1400 FWHP – forced air induction
    • Fuel-injected engines: METHANOL
      up to 840 FWHP – naturally-aspirated
      up to 630 FWHP – forced air induction
    • Carbureted engines: METHANOL
      Up to 910 FWHP – naturally-aspirated
      Up to 700 FWHP – forced air induction
  • Lighter than the traditional Pro-Series pump.
  • Reduced current draw at higher, EFI pressures.
  • Extended service life in methanol and ethanol.
  • New integral spur-gear pumping mechanism.
  • 90-PSI continuous operating pressure and up to 150-PSI peak pressure, base plus boost.
  • Integral, external brushless controller for a clean installation, cooler fuel, and enhanced reliability.
  • ORB-10 outlet port.
  • Requires straight 12-VDC to 16-VDC power supply.
  • Not compatible with pulse-modulated systems or fuel pump speed controllers.
  • This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications.

EFI Rated flow of 1,250 lbs./hr. @ 40 psi, 13.5 volts
Carb Rated Flow of 1,350 lbs./hr. @ 9 psi, 13.5 volts

Aeromotive’s True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on our existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat the introduction of environmental via reduced fuel recycling.

3.5GPM Brushless Diagrams – Click Here

Additional information

Weight 7 lbs
Dimensions 10.5 × 8.5 × 5.5 in

Mounting Configuration: In Tank

CARB or EFI Power Adder FUEL Horsepower
EFI Naturally Aspirated Gas 2400
CARB Naturally Aspirated Gas 2600
EFI Forced Induction Gas 1800
CARB Forced Induction Gas 2000
EFI Naturally Aspirated E85 1680
CARB Naturally Aspirated E85 1820
EFI Forced Induction E85 1260
CARB Forced Induction E85 1400