Aeromotive Products

18671 - Eliminator Corvette Stealth Kit

Tue, 07 Sep 2010 08:51:40 +0000

Finally, a solution to your Corvette's fuel system needs. No more drilling your fuel tanks, no more risking pump failure in a 1, 2, or 3 pump set ups, no more surge tanks, no more mess. Aeromotive has engineered a patent-pending, complete drop-in fuel system available for C6 and late C5 Corvettes. The system provides a single Eliminator Fuel Pump capable of supporting big HP. The best part, it's a complete drop-in assembly into your factory tank that still incorporates the factory jet siphon system. Now you can plumb a true return-style system into your Corvette without the worry of the siphon system and while using the factory fuel tank. For details on this system and the installation of the 18671 into your Corvette, download the installation instruction below. • Fits 2003 1/2 and later Corvettes (Late C5 and C6) • Supports up to 1900 HP – naturally aspirated • Supports up to 1400 HP – forced air induction • ORB-10 outlet port • ORB-06 return port • Incorporates factory jet siphon system and sending unit • Includes an integrated 100-Micron Stainless Steel pre-pump filter • Utilizes the factory tank, o-ring, lock ring and mounting location • Includes all necessary fittings and hardware to plumb the pump into your tank. - Remaining system plumbing not included. For recommendations on line sizes, filters, regulators and fuel rails, call our tech lines at: (913) 647-7300. Or follow the guidelines for the Eliminator Fuel Pump. For Eliminator (P/N 11104) specifications, CLICK HERE Download Installation Instructions Additional photos and videos can be found HERE

18670 - A1000 Corvette Stealth Kit

Tue, 07 Sep 2010 08:51:40 +0000

Finally, a solution to your Corvette's fuel system needs. No more drilling your fuel tanks, no more risking pump failure in a 1, 2, or 3 pump set ups, no more surge tanks, no more mess. Aeromotive has engineered a patent-pending, complete drop-in fuel system available for C6 and late C5 Corvettes. The system provides a single A1000 Fuel Pump capable of supporting big HP. The best part, it's a complete drop-in assembly into your factory tank that still incorporates the factory jet siphon system. Now you can plumb a true return-style system into your Corvette without the worry of the siphon system and while using the factory fuel tank. For details on this system and the installation of the 18670 into your Corvette, download the installation instruction below. • Fits 2003 1/2 and later Corvettes (Late C5 and C6) • Supports up to 1300 HP – naturally aspirated • Supports up to 1000 HP – forced air induction • ORB-10 outlet port • ORB-06 return port • Incorporates factory jet siphon system and sending unit • Includes an integrated 100-Micron Stainless Steel pre-pump filter • Utilizes the factory tank, o-ring, lock ring and mounting location • Includes all necessary fittings and hardware to plumb the pump into your tank. - Remaining system plumbing not included. For recommendations on line sizes, filters, regulators and fuel rails, call our tech lines at: (913) 647-7300. Or follow the guidelines for the A1000 Fuel Pump. For A1000 (P/N 11101) specifications, CLICK HERE Download Installation Instructions Additional photos and videos can be found HERE

14151 - Platinum Series 86-95 5.0L GT & Cobra Fuel Rail Kit

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 1986-1995 5.0L Ford Mustang GT & Cobra - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

13129 - EFI Bypass Regulator

Tue, 07 Sep 2010 08:51:40 +0000

This EFI Bypass Regulator encompasses features and benefits only found on Aeromotive regulators and in a new smaller and lighter package. Capable of supporting applications up to 1000 HP, the 13129 EFI Bypass Regulator can handle high-flow EFI fuel pumps and the most aggressive street machines; especially those looking for a cleaner, lighter solution where performance is critical or where space is a premium. • Base pressure adjustable from 30-70 psi • Fuel pressure rises on a 1:1 ratio with boost • Provides (2) ORB-06 inlet/outet ports and (1) ORB-06 return port • 1/8'' NPT gauge port • Vacuum boost port • CNC-Machined 6061 T6 billet aluminum construction • Stainless steel mounting bracket Download Installation Instructions

13159 - Platinum Series A1000-6 Injected Bypass Regulator

Tue, 07 Sep 2010 08:51:40 +0000

Performance EFI regulator designed for medium to high horsepower applications. This regulators features Aeromotive’s high-flow design, superb pressure control and legendary durability. On the street and at the track, this pressure regulator has logged more miles, laps and passes than any other performance EFI regulator in the world! Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. • Features a nickel finish. • Base pressure adjustable from 40-75 PSI. • Gasoline and alcohol compatible. • Fuel pressure rises on a 1:1 ratio with boost. • 1/8” NPT gauge port. • P/N 13109 provides (2) ORB-06 inlet ports and (1) ORB-06 return port. Download Installation Instructions

13155 - Platinum Series Compact EFI Regulator

Tue, 07 Sep 2010 08:51:40 +0000

Big performance in a small package. The Compact EFI Regulator is designed for applications producing up to 1,000 HP where space is at a premium. Ideal for EFI fuel delivery systems that are limited to one regulator inlet port. Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. • Features a nickel finish. • Adjustable from 30-70 PSI. • Equipped with removable AN-6 male fittings for inlet and outlet ports, eliminates the need to buy additional fittings and O-rings. • Dedicated, 1/8” NPT gauge port located opposite the side inlet. • Fuel pressure rises on a 1:1 ratio when referencing boost. Download Installation Instructions

13153 - Platinum Series Ford Rail Mount Regulator

Tue, 07 Sep 2010 08:51:40 +0000

Adjustable billet fuel pressure regulators designed to handle the demands of the Ford 4.6L, 5.0L and 5.4L engines. Installs easily on the stock factory fuel rail. (see applications below) Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. • Features a nickel finish. • Adjustable from 30-70 PSI. • Fuel pressure rises on a 1:1 ratio when referencing boost. • 1/8” NPT gauge port. • Stainless steel spring, custom-designed for precise fuel control. • Installation kit includes O-rings and gaskets. P/N 13102 94 - 98 1/2 4.6L 94 - 95 5.0L P/N 13103 86 - 93 5.0L Download Installation Instructions

13152 - Platinum Series Ford Rail Mount Regulator

Tue, 07 Sep 2010 08:51:40 +0000

13151 - Platinum Series A1000 Injected Bypass Regulator

Tue, 07 Sep 2010 08:51:40 +0000

Performance EFI regulator designed for medium to high horsepower applications. This regulators features Aeromotive’s high-flow design, superb pressure control and legendary durability. On the street and at the track, this pressure regulator has logged more miles, laps and passes than any other performance EFI regulator in the world! Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. • Features a nickel finish. • Base pressure adjustable from 40-75 PSI. • Gasoline and alcohol compatible. • Fuel pressure rises on a 1:1 ratio with boost. • 1/8” NPT gauge port. • P/N 13101 provides (2) ORB-10 inlet ports and (1) ORB-06 return port. Download Installation Instructions

13351 - Platinum Series Universal Bypass Regulator

Tue, 07 Sep 2010 08:51:40 +0000

A dual purpose, universal regulator for EFI or Carbureted and street or strip applications. Base pressure adjustable from 3 to 20 PSI with standard spring, (installed) or from 20 to 60 PSI with high pressure spring (included). Offers the full flow and rock steady fuel pressure that only a dynamic, Aeromotive bypass regulator provides. Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. • Features a nickel finish. • Capable of regulating any fuel pump between 100 and 250 GPH. • Fuel pressure rises on a 1:1 ratio when referencing boost. • All ports are 3/8” NPT, with one inlet and three outlets on the main body and one return port on the bottom. • Bypass design provides the ultimate, dynamic fuel pressure control. Note: (Requires a return line to be installed from the bottom of the regulator to the top of the tank.) Download Installation Instructions

13255 - Platinum Series SS Adjustable, 3/8'' NPT Regulator

Tue, 07 Sep 2010 08:51:40 +0000

Specifically designed for carbureted street or racing engines, these adjustable regulators offer higher flow, quicker response and less pressure creep than competing two-port designs. Ideal for dedicated nitrous applications. These regulators are used by many of the NASCAR® teams. Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. • Features a nickel finish. • Adjustable from 5-12 PSI. • P/N 13205 provides 3/8” NPT inlet and outlet ports. • 1/8” NPT gauge port. • Regulators re-seat after the carburetor needle shuts down, preventing pressure creep. • Includes mounting bracket Download Installation Instructions

13254 - Platinum Series A1000 Carbureted Bypass Regulator

Tue, 07 Sep 2010 08:51:40 +0000

The A1000 Bypass Regulator was designed for use with our A1000 Fuel Pump or similar style EFI pumps in a carbureted application. This regulator is perfect for naturally aspirated or “blow-through” supercharged engines. Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. • Features a nickel finish. • Base fuel pressure adjustable from 3-15 PSI. • (1) ORB-10 inlet port and (1) ORB-08 return port. • P/N 13204 provides (2) ORB-06 outlet ports and 1/8” NPT gauge port. • Fuel pressure rises on a 1:1 ratio when referencing boost. • Bypass design provides the ultimate, dynamic fuel delivery system. • Ideal for converting from fuel injection to carburetion using the stock, in-tank pump. • EFI conversions will require a larger-than-stock return line for proper low pressure control. Note: Requires AN-08 return line from bottom of regulator back to top of the tank. Download Installation Instructions

13251 - Platinum Series SS Adjustable, ORB-06 Regulator

Tue, 07 Sep 2010 08:51:40 +0000

Specifically designed for carbureted street or racing engines, these adjustable regulators offer higher flow, quicker response and less pressure creep than competing two-port designs. Ideal for dedicated nitrous applications. These regulators are used by many of the NASCAR® teams. Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. • Features a nickel finish. • Adjustable from 5-12 PSI. • P/N 13201 provides ORB-06 inlet and outlet ports. • 1/8” NPT gauge port. • Regulators re-seat after the carburetor needle shuts down, preventing pressure creep. • Includes mounting bracket. Download Installation Instructions

11259 - Platinum Series H/0 Fuel Pump - 3/8 NPT

Tue, 07 Sep 2010 08:51:40 +0000

Ideal for carbureted power plants not using a separate fuel pressure regulator. The H/O Fuel Pump is designed for engines making 200-600 HP and is ideal for street cars and mild race cars alike. Similar to our SS Fuel Pump (P/N 11203), but internally regulated to 7 PSI. Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. • Features a nickel finish. • P/N 11209 features 3/8” NPT inlet and outlet ports. • Durable billet construction. • Fuel flow exceeds 90 GPH at 5 PSI and draws less than 5 amps. • Internally regulated to 7 PSI, eliminating the need for a separate regulator on most carburetors. • Rated for continuous duty, the pumping mechanism features a composite rotor, stainless steel vanes and heat treated steel top and bottom plates for durability. Download Installation Instructions

11256 - Platinum Series Billet Mechanical SBC Fuel Pump

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s billet Small Block Chevy, block mounted pump sets a new standard for engineering to provide unparalleled durability. The six valve configuration delivers high volume while eliminating failures commonly seen in some conventional cast pumps. Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. • Features a nickel finish. • For gasoline engines only. • Develops 12 PSI line pressure when used with “static” pressure regulators. (P/N 13201, 13205) • For dynamic fuel systems use bypass regulators. (P/N 13204, 13301) • ORB-10 inlet port can be rotated 285º (independent of outlet) for infinite indexing. • ORB-08 outlet port may be clocked in 60º increments. • 1/4” NPT vent port may be used to remote vent the diaphragm as required in marine applications. • High alloy steel, CNC machined lever arm provides high strength to weight ratio for durability in severe duty applications. • CNC machined 6061-T6 aircraft aluminum body for superior strength and tighter tolerances. Download Installation Instructions

11253 - Platinum Series SS Fuel Pump - 3/8 NPT

Tue, 07 Sep 2010 08:51:40 +0000

A carbureted fuel pump that allows you to step up your performance by maintaining optimal line pressure and delivering high volume. The Street/Strip Pump was engineered for 200-750 HP carbureted engines making this a perfect choice for a daily driver, street rod or demanding ET-bracket race car. Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. • Features a nickel finish. • P/N 11203 features 3/8” NPT inlet and outlet ports. • Perfect for use with either a Bypass Regulator (P/N 13301) or one of our Carbureted Adjustable Regulators. (P/N 13201, 13205). • Fuel flow exceeds 140 GPH at 13.5 volts. • Pump provides 14 PSI fuel pressure - perfect for cars that leave hard. • Pumping mechanism features our proprietary composite rotor, stainless steel vanes and precision ground, heat treated steel plates. • Ideal for dedicated nitrous delivery. • Alcohol compatible. • Low current draw. (under 5 amps) Download Installation Instructions

11156 - Platinum Series 700 HP Fuel Pump

Tue, 07 Sep 2010 08:51:40 +0000

Compact, quiet and durable, these billet, in-line pumps are ideal for low to medium HP applications. Perfect for street rods and muscle cars, fuel injected or carbureted. Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. Fuel Injected Engines: up to 700 HP - naturally aspirated up to 500 HP - forced air induction Carbureted Engines: up to 900 HP - naturally aspirated up to 700 HP - forced air induction • Features a nickel finish. • ORB-8 inlet ports and ORB-6 outlet ports. • Durable pumping components that simply don’t wear out. • Compact size facilitates easy mounting. • For EFI applications use regulator P/N 13101 or P/N 13109. • For Carbureted applications use regulator P/N 13204 or P/N 13301. • Fully submersible for custom, in-tank placement. Download Installation Instructions

11151 - Platinum Series A1000 Fuel Pump

Tue, 07 Sep 2010 08:51:40 +0000

This is the pump that started it all. Durable, reliable, good looking and it supports high horsepower. Perfect for the daily driver that doesnʼt run like a daily driver. Each Platinum Series product features a mirror like, show-quality nickel finish that is virtually maintenance free and is identical in performance to its anodized brother. For more information, see the corresponding anodized product. Fuel Injected Engines: up to 1300 HP - naturally aspirated up to 1000 HP - forced air induction Carbureted Engines: up to 1500 HP - naturally aspirated up to 1200 HP - forced air induction • Features a nickel finish. • ORB-10 inlet and outlet ports. • For EFI applications use regulator P/N 13101 or P/N 13109. • For carbureted applications use regulator P/N 13204. • Fully submersible for custom, in-tank placement. • Perfect for “blow-through” carbureted engines up to 1200 HP. • Billet Speed Pump Controller (P/N 16302) recommended for EFI street applications. Download Installation Instructions

17148 - Eliminator 5.0L Mustang Stealth Tank

Tue, 07 Sep 2010 08:51:40 +0000

Complete bolt-in fuel systems for 86-95 5.0L Mustangs featuring the Aeromotive Stealth Sump Tank. These tanks feature an Aeromotive A1000 or Eliminator Fuel Pump and pre-filter built into the tank itself. Now you can have all the advantages of an in-tank system just like the OEs, but with the performance capability of an Aeromotive Fuel Pump. These system come with everything you need to install a complete Aeromotive Fuel System on a Fox Body Mustang. From the the bolt-in fuel tank to the fittings, hose-ends, hose, wires, clamps, fuel rails, regulator and filters. 1 part number gets you everything you need. No more guessing and no trips back to the local parts store. You'll have the ultimate in performance fueling, with the durability of an in-tank fuel pump. To learn more about the Aeromotive A1000 Fuel Pump or the Eliminator Fuel Pump and their specifications, visit their pages by following the links. Want to see more? Click to watch the video. For additional information on the Stealth Sumped Fuel Systems, call our Tech Lines at (913) 647-7300 Option 3. P/N 17148 features: Eliminator Fuel Pump - P/N 11104 Download Installation Instructions

18654 - Eliminator 5.0L Mustang Stealth Tank

Tue, 07 Sep 2010 08:51:40 +0000

Complete bolt-in fuel tank for 86-95 5.0L Mustangs featuring the Aeromotive Stealth Sump Kit already welded in. The tanks feature an Aeromotive A1000 or Eliminator Fuel Pump and pre-filter built into the tank itself. Now you can have all the advantages of an in-tank system just like the OEs, but with the performance capability of an Aeromotive Fuel Pump. Simply strap this tank in, hook up your feed and return line and your two wires and your done. You now have the ultimate in performance fueling, with the durability of an in-tank fuel pump. To learn more about the Aeromotive A1000 Fuel Pump or the Eliminator Fuel Pump and their specifications, visit their pages by following the links. In addition, if you'd like to learn more about the advantages the Aeromotive Stealth Sump can provide, click here. Want to see more? Click to watch the video. For additional information on the Stealth Sumped Fuel Tanks, call our Tech Lines at (913) 647-7300 Option 3. P/N 18654 features: Eliminator Fuel Pump - P/N 11104 Download Installation Instructions

17147 - A1000 5.0L Mustang Stealth Tank

Tue, 07 Sep 2010 08:51:40 +0000

Complete bolt-in fuel systems for 86-95 5.0L Mustangs featuring the Aeromotive Stealth Sump Tank. These tanks feature an Aeromotive A1000 or Eliminator Fuel Pump and pre-filter built into the tank itself. Now you can have all the advantages of an in-tank system just like the OEs, but with the performance capability of an Aeromotive Fuel Pump. These system come with everything you need to install a complete Aeromotive Fuel System on a Fox Body Mustang. From the the bolt-in fuel tank to the fittings, hose-ends, hose, wires, clamps, fuel rails, regulator and filters. 1 part number gets you everything you need. No more guessing and no trips back to the local parts store. You'll have the ultimate in performance fueling, with the durability of an in-tank fuel pump. To learn more about the Aeromotive A1000 Fuel Pump or the Eliminator Fuel Pump and their specifications, visit their pages by following the links. Want to see more? Click to watch the video. For additional information on the Stealth Sumped Fuel Systems, call our Tech Lines at (913) 647-7300 Option 3. P/N 17147 features: A1000 Fuel Pump - P/N 11101 Download Installation Instructions

18653 - A1000 5.0L Mustang Stealth Tank

Tue, 07 Sep 2010 08:51:40 +0000

Complete bolt-in fuel tank for 86-95 5.0L Mustangs featuring the Aeromotive Stealth Sump Kit already welded in. The tanks feature an Aeromotive A1000 or Eliminator Fuel Pump and pre-filter built into the tank itself. Now you can have all the advantages of an in-tank system just like the OEs, but with the performance capability of an Aeromotive Fuel Pump. Simply strap this tank in, hook up your feed and return line and your two wires and your done. You now have the ultimate in performance fueling, with the durability of an in-tank fuel pump. To learn more about the Aeromotive A1000 Fuel Pump or the Eliminator Fuel Pump and their specifications, visit their pages by following the links. In addition, if you'd like to learn more about the advantages the Aeromotive Stealth Sump can provide, click here. Want to see more? Click to watch the video. For additional information on the Stealth Sumped Fuel Tanks, call our Tech Lines at (913) 647-7300 Option 3. P/N 18653 features: A1000 Fuel Pump - P/N 11101 Download Installation Instructions

17252 - A1000 Carbureted Stealth Sump System

Tue, 07 Sep 2010 08:51:40 +0000

Fits virtually any fuel tank, this “weld-in” fuel sump box features an A1000 Fuel Pump and 100-micron stainless pre-pump filters inside the sump box. The innovative baffled designs provides optimal performance by keeping the fuel pump pick-up covered at all times even during extreme driving conditions. Plus you can service the components including the filter element externally without draining or dropping the tank thanks to the proprietary cam lock filter cap that shuts off fuel flow when rotated. The 17252 System features everything needed to completely install the Weld-In Stealth Sump in a carbureted application. Everything from the post pump filter to fittings, hose-ends, hose, wiring and clamps. Want to see more? Click to watch the video. For additional information on the weld-in Stealth Fuel Sump Kits, call our Tech Lines at (913) 647-7300 Option 3. P/N 17252 features: A1000 Fuel Pump - P/N 11101 Download Installation Instructions

13217 - Stackable Carbureted Regulator

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive's new Stackable Carbureted Fuel Pressure Regulators (P/N 13217). Ideal for carbureted nitrous engines, these regulators allow you to “stack” them together to control multiple pressures with a single fuel pump. The new “Stackable Regulator” is a clean, lightweight solution, ideal for nitrous engine combinations where unique pressures are desired. No longer will sportsman and professional racers have to screw together unsightly brass T’s and pipe fittings to create a so-called “fuel log”. The Aeromotive Stackable Regulator solution creates its own integrated fuel log, by utilizing a patent pending flow-through designed modular regulator body. Using a positive O-ring seal, simply bolt as many of these regulators together as needed using the provided cap screws and O-rings. Each billet aluminum, CNC-machined regulator is adjustable from 5-12 psi and is equipped with O-ring and ORB-Ports including; ORB-10 (flow-through) ports and (2) ORB-06 outlet ports. Capable of feeding single or dual carburetors and 1, 2, 3 and 4 or more stages of nitrous, all with total control of unique fuel pressures at every distribution point. For the ultimate nitrous fuel system, it’s easy to combine Aeromotive’s Pro-Stock 2 or 4-port regulators with the new Stackable Regulators, where all flow and pressure control is consolidated for a much cleaner, lighter package. Screw the combined Stackable Regulators to the inlet of an Aeromotive Carbureted Fuel Pressure Regulator, either dead-head or bypass style and control your carburetor system pressure separate from each stage of nitrous. With the new, Aeromotive Stackable Regulators you have more flexibility than ever before. These regulators are completely serviceable in the field without removing them from the car and can be combined with the Aeromotive A2000 fuel pump or the A1000, Eliminator and Pro-Series Pump. For more information about a system for your application call our tech lines. Each 13217 Regulator features: • Adjustable from 5-12 PSI. • ORB-10 inlet and outlet flow-through ports (flange stackable) • ORB-06 outlet ports. • Includes (2) O-rings, (2) 12-point cap screws • Serviceable in the field without removing from the car Download Installation Instructions

18666 - 6g A1000 Stealth Fuel Cell

Tue, 07 Sep 2010 08:51:40 +0000

Originally developed for the 2010 Ford Cobra Jet Mustangs, these 6 gallon aluminum fuel cells feature the same advantages of the 15 and 20 gallon versions, but without the street-style sending unit. Plus, the compact 6 gallon size, makes it perfect for drag racing and other like applications where large fuel capacity is not an issue. This is a truly universal aluminum fuel cell featuring an Aeromotive high performance fuel pump and pre-pump filter built right into the fuel cell. These Stealth Fuel Cells feature an innovative integral baffling system to maintain a column of fuel at the pickup point, eliminating fuel slosh issues making these cells perfect for any application from autocross, to road racing to drifitng and off-road. Simply strap the cell in, hook up your feed and return lines and your done. Now you have a complete "in-tank" fuel system without the need for expensive custom tanks or the hassle of welding sump boxes or modifying inadequate pick up tubes. With either the A1000 or the Eliminator Fuel Pump, the Stealth Fuel Cells are truly universal, preforming perfectly in anything from a 300HP carbureted application to 1700HP EFI application. By matching the right regulator to your application, this system will be the last fuel system you will ever need to buy. Need help choosing the right regulator, call our tech lines at (913) 647-7300 Option 3. P/N 18666 features: • A1000 Fuel Pump (internal) - P/N 11101 • 100 Micron Stainless Steel Fuel Filter • 6.2 Gallon Capacity • Return Line Provision • (2) AN-08 Vents with Rollover Valves • Standard 12-Bolt Flush Mount Lid Assembly • Natural Aluminum Finish Dimensions: 12''L x 12''W x 10''H Download Installation Instructions

18667 - 6g Eliminator Stealth Fuel Cell

Tue, 07 Sep 2010 08:51:40 +0000

Originally developed for the 2010 Ford Cobra Jet Mustangs, these 6 gallon aluminum fuel cells feature the same advantages of the 15 and 20 gallon versions, but without the street-style sending unit. Plus, the compact 6 gallon size, makes it perfect for drag racing and other like applications where large fuel capacity is not an issue. This is a truly universal aluminum fuel cell featuring an Aeromotive high performance fuel pump and pre-pump filter built right into the fuel cell. These Stealth Fuel Cells feature an innovative integral baffling system to maintain a column of fuel at the pickup point, eliminating fuel slosh issues making these cells perfect for any application from autocross, to road racing to drifitng and off-road. Simply strap the cell in, hook up your feed and return lines and your done. Now you have a complete "in-tank" fuel system without the need for expensive custom tanks or the hassle of welding sump boxes or modifying inadequate pick up tubes. With either the A1000 or the Eliminator Fuel Pump, the Stealth Fuel Cells are truly universal, preforming perfectly in anything from a 300HP carbureted application to 1700HP EFI application. By matching the right regulator to your application, this system will be the last fuel system you will ever need to buy. Need help choosing the right regulator, call our tech lines at (913) 647-7300 Option 3. P/N 18667 features: • Eliminator Fuel Pump (internal) - P/N 11104 • 100 Micron Stainless Steel Fuel Filter • 6.2 Gallon Capacity • Return Line Provision • (2) AN-08 Vents with Rollover Valves • Standard 12-Bolt Flush Mount Lid Assembly • Natural Aluminum Finish Dimensions: 12''L x 12''W x 10''H Download Installation Instructions

18652 - Eliminator Stealth Sump Kit

Tue, 07 Sep 2010 08:51:40 +0000

Fits virtually any fuel tank, these “weld-in” fuel sump boxes feature A1000 or Eliminator Fuel Pumps and 100-micron stainless pre-pump filters inside the sump box. The innovative baffled designs provides optimal performance by keeping the fuel pump pick-up covered at all times even during extreme driving conditions. Plus you can service the components including the filter element externally without draining or dropping the tank thanks to the proprietary cam lock filter cap that shuts off fuel flow when rotated. Want to see more? Click to watch the video. For additional information on the weld-in Stealth Fuel Sump Kits, call our Tech Lines at (913) 647-7300 Option 3. P/N 18652 features: Eliminator Fuel Pump - P/N 11104 Download Installation Instructions

18651 - A1000 Stealth Sump Kit

Tue, 07 Sep 2010 08:51:40 +0000

Fits virtually any fuel tank, these “weld-in” fuel sump boxes feature A1000 or Eliminator Fuel Pumps and 100-micron stainless pre-pump filters inside the sump box. The innovative baffled designs provides optimal performance by keeping the fuel pump pick-up covered at all times even during extreme driving conditions. Plus you can service the components including the filter element externally without draining or dropping the tank thanks to the proprietary cam lock filter cap that shuts off fuel flow when rotated. Want to see more? Click to watch the video. For additional information on the weld-in Stealth Fuel Sump Kits, call our Tech Lines at (913) 647-7300 Option 3. P/N 18651 features: A1000 Fuel Pump - P/N 11101 Download Installation Instructions

18663 - 20g Eliminator Stealth Fuel Cell

Tue, 07 Sep 2010 08:51:40 +0000

Truly universal aluminum fuel cell featuring an Aeromotive high performance fuel pump and pre-pump filter built right into the fuel cell. These Stealth Fuel Cells feature an innovative integral baffling system to maintain a column of fuel at the pickup point, eliminating fuel slosh issues making these cells perfect for any application from autocross, to road racing to drifitng and off-road. Simply strap the cell in, hook up your feed and return lines and your done. Now you have a complete "in-tank" fuel system without the need for expensive custom tanks or the hassle of welding sump boxes or modifying inadequate pick up tubes. With either the A1000 or the Eliminator Fuel Pump, the Stealth Fuel Cells are truly universal, preforming perfectly in anything from a 300HP carbureted application to 1700HP EFI application. By matching the right regulator to your application, this system will be the last fuel system you will ever need to buy. Need help choosing the right regulator, call our tech lines at (913) 647-7300 Option 3. P/N 18663 features: • Eliminator Fuel Pump (internal) - P/N 11104 • 100 Micron Stainless Steel Fuel Filter • 20 Gallon Capacity • Return Line Provision • (2) AN-08 Vents with Rollover Valves • 0-90 Ohm Universal Sending Unit • Standard 12-Bolt Flush Mount Lid Assembly • Natural Aluminum Finish Dimensions: 24''L x 20''W x 10''H Download Installation Instructions

18660 - 15g A1000 Stealth Fuel Cell

Tue, 07 Sep 2010 08:51:40 +0000

Truly universal aluminum fuel cell featuring an Aeromotive high performance fuel pump and pre-pump filter built right into the fuel cell. These Stealth Fuel Cells feature an innovative integral baffling system to maintain a column of fuel at the pickup point, eliminating fuel slosh issues making these cells perfect for any application from autocross, to road racing to drifitng and off-road. Simply strap the cell in, hook up your feed and return lines and your done. Now you have a complete "in-tank" fuel system without the need for expensive custom tanks or the hassle of welding sump boxes or modifying inadequate pick up tubes. With either the A1000 or the Eliminator Fuel Pump, the Stealth Fuel Cells are truly universal, preforming perfectly in anything from a 300HP carbureted application to 1700HP EFI application. By matching the right regulator to your application, this system will be the last fuel system you will ever need to buy. Need help choosing the right regulator, call our tech lines at (913) 647-7300 Option 3. P/N 18660 features: • A1000 Fuel Pump (internal) - P/N 11101 • 100 Micron Stainless Steel Fuel Filter • 15 Gallon Capacity • Return Line Provision • (2) AN-08 Vents with Rollover Valves • 0-90 Ohm Universal Sending Unit • Standard 12-Bolt Flush Mount Lid Assembly • Natural Aluminum Finish Dimensions: 18''L x 20''W x 10''H Download Installation Instructions

18662 - 15g Eliminator Stealth Fuel Cell

Tue, 07 Sep 2010 08:51:40 +0000

Truly universal aluminum fuel cell featuring an Aeromotive high performance fuel pump and pre-pump filter built right into the fuel cell. These Stealth Fuel Cells feature an innovative integral baffling system to maintain a column of fuel at the pickup point, eliminating fuel slosh issues making these cells perfect for any application from autocross, to road racing to drifitng and off-road. Simply strap the cell in, hook up your feed and return lines and your done. Now you have a complete "in-tank" fuel system without the need for expensive custom tanks or the hassle of welding sump boxes or modifying inadequate pick up tubes. With either the A1000 or the Eliminator Fuel Pump, the Stealth Fuel Cells are truly universal, preforming perfectly in anything from a 300HP carbureted application to 1700HP EFI application. By matching the right regulator to your application, this system will be the last fuel system you will ever need to buy. Need help choosing the right regulator, call our tech lines at (913) 647-7300 Option 3. P/N 18662 features: • Eliminator Fuel Pump (internal) - P/N 11104 • 100 Micron Stainless Steel Fuel Filter • 15 Gallon Capacity • Return Line Provision • (2) AN-08 Vents with Rollover Valves • 0-90 Ohm Universal Sending Unit • Standard 12-Bolt Flush Mount Lid Assembly • Natural Aluminum Finish Dimensions: 18''L x 20''W x 10''H Download Installation Instructions

18661 - 20g A1000 Stealth Fuel Cell

Tue, 07 Sep 2010 08:51:40 +0000

Truly universal aluminum fuel cell featuring an Aeromotive high performance fuel pump and pre-pump filter built right into the fuel cell. These Stealth Fuel Cells feature an innovative integral baffling system to maintain a column of fuel at the pickup point, eliminating fuel slosh issues making these cells perfect for any application from autocross, to road racing to drifitng and off-road. Simply strap the cell in, hook up your feed and return lines and your done. Now you have a complete "in-tank" fuel system without the need for expensive custom tanks or the hassle of welding sump boxes or modifying inadequate pick up tubes. With either the A1000 or the Eliminator Fuel Pump, the Stealth Fuel Cells are truly universal, preforming perfectly in anything from a 300HP carbureted application to 1700HP EFI application. By matching the right regulator to your application, this system will be the last fuel system you will ever need to buy. Need help choosing the right regulator, call our tech lines at (913) 647-7300 Option 3. P/N 18661 features: • A1000 Fuel Pump (internal) - P/N 11101 • 100 Micron Stainless Steel Fuel Filter • 20 Gallon Capacity • Return Line Provision • (2) AN-08 Vents with Rollover Valves • 0-90 Ohm Universal Sending Unit • Standard 12-Bolt Flush Mount Lid Assembly • Natural Aluminum Finish Dimensions: 24''L x 20''W x 10''H Download Installation Instructions

17136 - 700 HP EFI Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

If you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. This system includes everything needed for a complete Aeromotive system installation in an EFI application. All systems include fuel pump, filters, regulator, port fittings, stainless steel braided hose, hose-ends, wiring and installation hardware. Does NOT include fuel rails. 700 HP EFI Fuel System includes: P/N 11106 700 HP EFI Fuel Pump P/N 13109 Fuel Pressure Regulator for additional included part numbers see the bill of materials in the Product Instructions Download Product Instructions

17135 - Tsunami EFI Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

If you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. This system includes everything needed for a complete Aeromotive system installation in an EFI application. All systems include fuel pump, filters, regulator, port fittings, stainless steel braided hose, hose-ends, wiring and installation hardware. Does NOT include fuel rails. Tsunami EFI Fuel System includes: P/N 11103 Tsunami Fuel Pump P/N 13109 Fuel Pressure Regulator for additional included part numbers see the bill of materials in the Product Instructions Download Product Instructions

17126 - Eliminator EFI Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

If you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. This system includes everything needed for a complete Aeromotive system installation in an EFI application. All systems include fuel pump, filters, regulator, port fittings, stainless steel braided hose, hose-ends, wiring and installation hardware. Does NOT include fuel rails. Eliminator EFI Fuel System includes: P/N 11104 Eliminator Fuel Pump P/N 13101 Fuel Pressure Regulator for additional included part numbers see the bill of materials in the Product Instructions Download Product Instructions

17125 - A1000 EFI Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

If you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. This system includes everything needed for a complete Aeromotive system installation in an EFI application. All systems include fuel pump, filters, regulator, port fittings, stainless steel braided hose, hose-ends, wiring and installation hardware. Does NOT include fuel rails. A1000 EFI Fuel System includes: P/N 11101 A1000 Fuel Pump P/N 13101 Fuel Pressure Regulator for additional included part numbers see the bill of materials in the Product Instructions Download Product Instructions

17242 - A1000 Carbureted Fuel System (single carb)

Tue, 07 Sep 2010 08:51:40 +0000

If you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. This system includes everything needed for a complete Aeromotive system installation in a carbureted application. All systems include fuel pump, filters, regulator, port fittings, stainless steel braided hose, hose-ends, wiring and installation hardware. A1000 Carbureted Fuel System includes: for single carb setups P/N 11101 A1000 Fuel Pump P/N 13204 Fuel Pressure Regulator for additional included part numbers see the bill of materials in the Product Instructions Download Product Instructions

17204 - A2000 Carbureted Fuel System (dual carb)

Tue, 07 Sep 2010 08:51:40 +0000

If you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. This system includes everything needed for a complete Aeromotive system installation in a carbureted application. All systems include fuel pump, filters, regulator, port fittings, stainless steel braided hose, hose-ends, wiring and installation hardware. A2000 Carbureted Fuel System includes: for dual carb setups P/N 11202 Fuel Pump P/N 13203 Fuel Pressure Regulator for additional included part numbers see the bill of materials in the Product Instructions Download Product Instructions

17203 - A2000 Carbureted Fuel System (single carb)

Tue, 07 Sep 2010 08:51:40 +0000

If you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. This system includes everything needed for a complete Aeromotive system installation in a carbureted application. All systems include fuel pump, filters, regulator, port fittings, stainless steel braided hose, hose-ends, wiring and installation hardware. A2000 Carbureted Fuel System includes: for single carb setups P/N 11202 Fuel Pump P/N 13201 Fuel Pressure Regulator for additional included part numbers see the bill of materials in the Product Instructions Download Product Instructions

17201 - SS Carbureted Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

If you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. This system includes everything needed for a complete Aeromotive system installation in a carbureted application. All systems include fuel pump, filters, regulator, port fittings, stainless steel braided hose, hose-ends, wiring and installation hardware. SS Carbureted Fuel System includes: P/N 11203 Fuel Pump P/N 13201 Fuel Pressure Regulator for additional included part numbers see the bill of materials in the Product Instructions Download Product Instructions

17150 - 700 HP Hot Rod EFI System

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s 700 HP Hot Rod EFI kits give you all the core components you need to create a streetable, capable EFI fuel system for your Street Rod, Muscle Car or Pro-Street vehicle. This is the perfect starting point for a fuel system to support the ‘HOT” trend of swapping EFI crate-motors into early Muscle Cars, Pro-Street Cruisers and Vintage Street Rods. The 700 HP Hot Rod EFI kit does not include fuel lines or hose-ends, making it ideal for car builders who prefer choosing their own type and style of fuel lines and connectors, but want the benefit of matched system components and the reduced cost associated with kit pricing. A1000 Hot Rod EFI System includes: P/N 11106 700 HP EFI Fuel Pump P/N 13109 Regulator P/N 12301 Fuel Filter P/N 12304 Fuel Filter P/N 15633 Fuel Pressure Gauge For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17151 - A1000 Hot Rod EFI System

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s A1000 Hot Rod EFI kits give you all the core components you need to create a streetable, capable EFI fuel system for your Street Rod, Muscle Car or Pro-Street vehicle. This is the perfect starting point for a fuel system to support the ‘HOT” trend of swapping EFI crate-motors into early Muscle Cars, Pro-Street Cruisers and Vintage Street Rods. The A1000 Hot Rod EFI kit does not include fuel lines or hose-ends, making it ideal for car builders who prefer choosing their own type and style of fuel lines and connectors, but want the benefit of matched system components and the reduced cost associated with kit pricing. A1000 Hot Rod EFI System includes: P/N 11101 A1000 Fuel Pump P/N 13101 Regulator P/N 12301 Fuel Filter P/N 12304 Fuel Filter P/N 15633 Fuel Pressure Gauge For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17247 - SS Fuel Pump & Regulator Kit (AN)

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s Universal Fuel Systems are designed to provide the do-it-yourselfer with ALL the hardware and components necessary to properly install a “full-on” Aeromotive fuel system. If you’re building a street/strip car or one strictly for racing, you can select one of the systems available for carbureted or fuel injected engines. Suitable for installation in any chassis, these systems provide a wide range of performance, from 250 to 2000 HP. Bottom line, if you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. SS Fuel Pump & Regulator Kit Includes: P/N 11213 Fuel Pump P/N 13201 Fuel Filter P/N 15632 Fuel Pressure Gauge Download Installation Instructions

17246 - SS Fuel Pump & Regulator Kit (NPT)

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s Universal Fuel Systems are designed to provide the do-it-yourselfer with ALL the hardware and components necessary to properly install a “full-on” Aeromotive fuel system. If you’re building a street/strip car or one strictly for racing, you can select one of the systems available for carbureted or fuel injected engines. Suitable for installation in any chassis, these systems provide a wide range of performance, from 250 to 2000 HP. Bottom line, if you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. SS Fuel Pump & Regulator Kit Includes: P/N 11203 Fuel Pump P/N 13205 Fuel Filter P/N 15632 Fuel Pressure Gauge Download Installation Instructions

17140 - Belt Drive Pump Kit

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s Universal Fuel Systems are designed to provide the do-it-yourselfer with ALL the hardware and components necessary to properly install a “full-on” Aeromotive fuel system. If you’re building a street/strip car or one strictly for racing, you can select one of the systems available for carbureted or fuel injected engines. Suitable for installation in any chassis, these systems provide a wide range of performance, from 250 to 2000 HP. Bottom line, if you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. Belt Drive Fuel Pump Kit Includes: P/N 11105 Fuel Pump Gilmer Pulley and Mounting Bracket For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17245 - H/O Carbureted Fuel Pump Kit

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s Universal Fuel Systems are designed to provide the do-it-yourselfer with ALL the hardware and components necessary to properly install a “full-on” Aeromotive fuel system. If you’re building a street/strip car or one strictly for racing, you can select one of the systems available for carbureted or fuel injected engines. Suitable for installation in any chassis, these systems provide a wide range of performance, from 250 to 2000 HP. Bottom line, if you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. H/O Carbureted Fuel Pump Kit Includes: P/N 11209 Fuel Pump P/N 12324 Fuel Filter & all necessary fittings, plumbing, wiring and hardware for a complete installation For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17202 - A2000 Fuel Pump Kit

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s Universal Fuel Systems are designed to provide the do-it-yourselfer with ALL the hardware and components necessary to properly install a “full-on” Aeromotive fuel system. If you’re building a street/strip car or one strictly for racing, you can select one of the systems available for carbureted or fuel injected engines. Suitable for installation in any chassis, these systems provide a wide range of performance, from 250 to 2000 HP. Bottom line, if you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. A2000 Fuel Pump Kit Includes: P/N 11202 Fuel Pump P/N 12304 Fuel Filter & all necessary fittings, plumbing, wiring and hardware for a complete installation For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17122 - SS Fuel Pump Kit

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s Universal Fuel Systems are designed to provide the do-it-yourselfer with ALL the hardware and components necessary to properly install a “full-on” Aeromotive fuel system. If you’re building a street/strip car or one strictly for racing, you can select one of the systems available for carbureted or fuel injected engines. Suitable for installation in any chassis, these systems provide a wide range of performance, from 250 to 2000 HP. Bottom line, if you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense. SS Fuel Pump Kit Includes: P/N 11203 Fuel Pump P/N 12303 Fuel Filter & All necessary fittings, plumbing, wiring and hardware for a complete installation For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17121 - A4 Regulator Kit

Tue, 07 Sep 2010 08:51:40 +0000

17120 - 13201 Regulator Kit

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive regulator kits provide you with everything needed to completely install these regulators on your muscle car, street rod or pro street vehicle. Comes complete with regulator, mounting hardware, stainless steel braided hose, hose-ends and port fittings. Available for single and dual carb setups. Kit Includes: P/N 13201 Regulator Kit All necessary hardware for mounting and installation for single carburetor setups. For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17146 - 98 1/2-04 4.6L DOHC Cobra Eliminator Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1998 1/2 to 2004 4.6L DOHC Mustangs. These Complete Fuel Systems include the following part numbers and everything necessary for the installation of a complete fuel system. Does NOT include fuel tank. P/N 11101 - Eliminator Fuel Pump P/N 12304 - 100 Micron Pre Filter P/N 12301 - 10 Micron Post Filter P/N 14111 - 4.6L DOHC Fuel Rails P/N 13101 - A1000 EFI Regulator For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17145 - 98 1/2-04 4.6L DOHC Cobra A1000 Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1998 1/2 to 2004 4.6L DOHC Mustangs. These Complete Fuel Systems include the following part numbers and everything necessary for the installation of a complete fuel system. Does NOT include fuel tank. P/N 11101 - A1000 Fuel Pump P/N 12304 - 100 Micron Pre Filter P/N 12301 - 10 Micron Post Filter P/N 14111 - 4.6L DOHC Fuel Rails P/N 13101 - A1000 EFI Regulator For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17144 - 96-98 1/2 4.6L DOHC Cobra Eliminator Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1996 to 1998 1/2 4.6L DOHC Mustangs. These Complete Fuel Systems include the following part numbers and everything necessary for the installation of a complete fuel system. Does NOT include fuel tank. P/N 11101 - Eliminator Fuel Pump P/N 12304 - 100 Micron Pre Filter P/N 12301 - 10 Micron Post Filter P/N 14104 - 4.6L DOHC Fuel Rails P/N 13101 - A1000 EFI Regulator For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17143 - 96-98 1/2 4.6L DOHC Cobra A1000 Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1996 to 1998 1/2 4.6L DOHC Mustangs. These Complete Fuel Systems include the following part numbers and everything necessary for the installation of a complete fuel system. Does NOT include fuel tank. P/N 11101 - A1000 Fuel Pump P/N 12304 - 100 Micron Pre Filter P/N 12301 - 10 Micron Post Filter P/N 14104 - 4.6L DOHC Fuel Rails P/N 13101 - A1000 EFI Regulator For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17142 - 96-04 4.6L SOHC GT Eliminator Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1996 to 2004 4.6L SOHC Mustangs. These Complete Fuel Systems include the following part numbers and everything necessary for the installation of a complete fuel system. Does NOT include fuel tank. P/N 11101 - Eliminator Fuel Pump P/N 12304 - 100 Micron Pre Filter P/N 12301 - 10 Micron Post Filter P/N 14103 - 4.6L Fuel Rails P/N 13101 - A1000 EFI Regulator For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17141 - 96-04 4.6L SOHC GT A1000 Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1996 to 2004 4.6L SOHC Mustangs. These Complete Fuel Systems include the following part numbers and everything necessary for the installation of a complete fuel system. Does NOT include fuel tank. P/N 11101 - A1000 Fuel Pump P/N 12304 - 100 Micron Pre Filter P/N 12301 - 10 Micron Post Filter P/N 14103 - 4.6L Fuel Rails P/N 13101 - A1000 EFI Regulator For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17110 - 5.0L Mustang Eliminator Fuel System Only

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1986 to 1995 5.0L Mustangs. These Complete Fuel Systems include the following part numbers and everything necessary for the installation of a complete fuel system. Does NOT include fuel tank. P/N 11101 - Eliminator Fuel Pump P/N 12304 - 100 Micron Pre Filter P/N 12301 - 10 Micron Post Filter P/N 14101 - 5.0L Fuel Rails P/N 13101 - A1000 EFI Regulator For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17109 - 5.0L Mustang A1000 Fuel System Only

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1986 to 1995 5.0L Mustangs. These Complete Fuel Systems include the following part numbers and everything necessary for the installation of a complete fuel system. Does NOT include fuel tank. P/N 11101 - A1000 Fuel Pump P/N 12304 - 100 Micron Pre Filter P/N 12301 - 10 Micron Post Filter P/N 14101 - 5.0L Fuel Rails P/N 13101 - A1000 EFI Regulator For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17106 - 5.0L Mustang Eliminator Fuel System & Sumped Tank

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1986 to 1995 5.0L Mustangs. These Complete Fuel Systems include the following part numbers and everything necessary for the installation of the sumped fuel tank and included fuel pump. P/N 11104 - Eliminator Fuel Pump P/N 12304 - 100 Micron Pre Filter P/N 12301 - 10 Micron Post Filter P/N 18601 - Sumped Fuel Tank P/N 14101 - 5.0L Fuel Rails P/N 13101 - A1000 EFI Regulator For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17105 - 5.0L Mustang A1000 Fuel System & Sumped Tank

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1986 to 1995 5.0L Mustangs. These Complete Fuel Systems include the following part numbers and everything necessary for the installation of the sumped fuel tank and included fuel pump. P/N 11101 - A1000 Fuel Pump P/N 12304 - 100 Micron Pre Filter P/N 12301 - 10 Micron Post Filter P/N 18601 - Sumped Fuel Tank P/N 14101 - 5.0L Fuel Rails P/N 13101 - A1000 EFI Regulator For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17107 - 5.0L Mustang A1000 Back Half Only Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1986 to 1995 5.0L Mustangs. These Back Half Only Kits include the following part numbers and everything necessary for the installation of the fuel pump. P/N 11101 - A1000 Fuel Pump P/N 12304 - 100 Micron Pre Filter P/N 12301 - 10 Micron Post Filter For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17103 - 5.0L Mustang A1000 Back Half & Tank Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

In a word; Aeromotive Fuel Systems DELIVER! These systems deliver more than just the fuel your engine needs, but also the ease of installation any do-it-yourselfer can appreciate. Aeromotive Fuel Systems are more than the sum of their parts, they are a complete system engineered for your application. With thousands of our systems installed, and millions of miles in service, no other manufacturer delivers more fuel (and less headaches) than Aeromotive! Designed for use with 1986 to 1995 5.0L Mustangs. These Back Half Kits include the following part numbers and everything necessary for the installation of the fuel tank and included fuel pump. P/N 18601 - Ford Mustang Sumped Fuel Tank P/N 11101 - A1000 Fuel Pump For a complete list of included part numbers, see the bill of materials in the installation instructions. Download Installation Instructions

17243 - BB Chevy Belt Drive Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

Designed for alcohol carbureted cars, this systems brings together matched components including the BBC Belt Drive Kit (P/N 17241) and our Double Adjustable Bypass Regulator (P/N 13209), designed to work together to maximize performance and consistency. It guarantees precise, accurate, repeatable and reliable fuel delivery and pressure control unmatched by any other alcohol carbureted fuel system. • Methanol and Ethanol compatible. • Adjust idle fuel pressure separate from the high-RPM setting, no jets, pills or other valves required. • System includes: BBC Belt Drive Kit (P/N 17241) and Double Adjustable Bypass Regulator (P/N 13209). • Fittings sold separately.

17241 - BB Chevy Belt Drive Kit

Tue, 07 Sep 2010 08:51:40 +0000

This kit can produce anywhere from 2-200 PSI with enough volume to support 2500 HP from your big block Chevy. Includes our Belt Drive Fuel Pump (pg. 16), capable of producing high volume and supports high or low pressure whether its fuel injected (electric or mechanical), carbureted, blown, turbocharged or nitrous assisted. • Kit includes: Belt Drive Fuel Pump (P/N 11105), BBC drive mandrel, pump pulley, crank pulley, cog belt, BBC mounting bracket, adjustment shims & hardware. • Designed for lower left mounting. Modifications necessary for right-hand mounting. • EFI applications use Aeromotive Regulator P/N 13113 (sold separately) • Carbureted gasoline applications use Aeromotive Regulator P/N 13202 or 13212. (sold separately) • Carbureted alcohol applications use Aeromotive Regulator P/N 13209 or 13214. (sold separately) For a complete list of included products, Download Installation Instructions

17102 - 94-97 LT-1 Bolt-On Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

Like all Aeromotive Bolt-On Fuel Systems, these GM Systems are designed to minimize confusion and maximize performance through perfectly matched components with everything you need for installation. The LT-1 Systems are designed for 93-97 LT-1 Camaros and Firebirds. • Features the Aeromotive A1000 Fuel Pump • GM LT-1 Regulator P/N 13107 for the 94-97 models • Aeromotive 100 Micron Fuel Filter (P/N 12304) • Includes: Stainless steel braided hose, hose ends, all necessary fittings, wiring and all additional hardware for installation on LT-1 F-Body cars utilizing stock fuel lines. To view a list of included part numbers for this kit, Download Installation Instructions

17101 - 93 LT-1 Bolt-On Fuel System

Tue, 07 Sep 2010 08:51:40 +0000

Like all Aeromotive Bolt-On Fuel Systems, these GM Systems are designed to minimize confusion and maximize performance through perfectly matched components with everything you need for installation. The LT-1 Systems are designed for 93-97 LT-1 Camaros and Firebirds. • Features the Aeromotive A1000 Fuel Pump • GM LT-1 Regulator P/N 13106 for the ʻ93 model; P/N 13107 for the 94-97 models • Aeromotive 100 Micron Fuel Filter (P/N 12304) • Includes: Stainless steel braided hose, hose ends, all necessary fittings, wiring and all additional hardware for installation on LT-1 F-Body cars utilizing stock fuel lines. To view a list of included part numbers for this kit, Download Installation Instructions

12309 - Marine Inlet, ORB-12 Fuel Filter

Tue, 07 Sep 2010 08:51:40 +0000

• High-flow, 100-micron stainless steel (coarse) cleanable element. • Flows 2,000 lb/hr with a pressure drop of less than .15 PSI. • ORB-12 ports. Fittings available to adapt these filters to AN-12, -10 line sizes. (see Fittings & Adapters) • 7” long x 2.5” diameter For additional information on this product, see Regulator P/N 12302

12311 - Marine Outlet, ORB-12 Fuel Filter

Tue, 07 Sep 2010 08:51:40 +0000

• High-flow, 10-micron fabric (fine) replaceable element. • Flows 2,000 lb/hr with a pressure drop of less than .5 PSI. • ORB-12 ports. Fittings available to adapt these filters to AN-12, -10 line sizes. (see Fittings & Adapters) • 7” long x 2.5” diameter For additional information on this product, see Regulator P/N 12310

12307 - Marine Inlet, ORB-10 Fuel Filter

Tue, 07 Sep 2010 08:51:40 +0000

• High-flow, 100-micron stainless steel (coarse) cleanable element. • Flows 2,000 lb/hr with a pressure drop of less than .5 PSI. • ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings & Adapters) • Compact size: 5.5” long x 2” diameter For additional information on this product, see Regulator P/N 12304

12306 - Marine Outlet, ORB-10 Fuel Filter

Tue, 07 Sep 2010 08:51:40 +0000

• High-flow, 10-micron fabric (fine) replaceable element. • Flows 2,000 lb/hr with a pressure drop of less than 1 PSI. • ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings & Adapters) • Compact size: 5.5” long x 2” diameter For additional information on this product, see Regulator P/N 12301

13114 - Marine A1000 Injected Bypass Regulator

Tue, 07 Sep 2010 08:51:40 +0000

A true performance EFI Regulator designed for medium to high horsepower marine applications. Features Aeromotive’s high-flow design, superb pressure control and legendary durability. This pressure control regulator has logged more hours than any other performance EFI marine regulator in the world! • Base pressure adjustable from 40-75 PSI • Fuel pressure rises on a 1:1 ratio with boost • 1/8” gauge port included • Provides (2) ORB-10 inlet ports and one ORB-06 return port. For additional information on this product, see Regulator P/N 13101 Download Installation Instructions

13207 - Marine A1000 Bypass Regulator

Tue, 07 Sep 2010 08:51:40 +0000

Full volume at perfect pressure, the A1000 Regulator was designed for use with our Marine A1000 Fuel Pump or any similar style pump. This regulator is perfect for naturally aspirated or “blow-through” turbo-charged or supercharged engines. • Base fuel pressure adjustable from 3-15 PSI • (1) ORB-10 inlet port and (1) ORB-8 return port. • (2) ORB-6 outlet ports and 1/8” NPT gauge port. • Fuel pressure rises on a 1:1 ratio when referencing boost. For additional information on this product, see Regulator P/N 13204 Download Installation Instructions

13215 - Marine Carbureted Adjustable Regulator, 3/8'' NPT

Tue, 07 Sep 2010 08:51:40 +0000

Specifically designed for carbureted marine engines, these adjustable regulators offer higher flow, quicker response and less pressure creep than competing two-port designs. • Adjustable from 5-12 PSI • Provides 3/8” NPT inlet and outlet ports. • 1/8” NPT gauge port included • Regulators re-seat after the needle shuts down, preventing pressure creep. For additional information on this product, see Regulator P/N 13205 Download Installation Instructions

13211 - Marine Carbureted Adjustable Regulator, ORB-06

Tue, 07 Sep 2010 08:51:40 +0000

Specifically designed for carbureted marine engines, these adjustable regulators offer higher flow, quicker response and less pressure creep than competing two-port designs. • Adjustable from 5-12 PSI • Provides ORB-06 inlet and outlet ports. • 1/8” NPT gauge port included • Regulator re-seats after the needle shuts down, preventing pressure creep. For additional information on this product, see Regulator P/N 13201 Download Installation Instructions

11212 - Marine Carbureted H/O Fuel Pump

Tue, 07 Sep 2010 08:51:40 +0000

For additional information on this product, see the H/O Fuel Pump, P/N 11209 • Certifi ed to ISO 8846, SAE J1171 & United States Coast Guard Requirements for Ignition Protection & Fire Resistance. • Supports up to 600 HP. • Fuel flow exceeds 90 GPH at 5 PSI and draws less than 5 amps. • Internally regulated to 7 PSI, eliminating the need for a separate regulator on most carburetors. • 3/8” NPT inlet and outlet ports. • Full, 2 year, factory direct warranty. Download Installation Instructions

11211 - Marine Carbureted SS Fuel Pump

Tue, 07 Sep 2010 08:51:40 +0000

For additional information on this product, see the SS Fuel Pump, P/N 11203 • Certifi ed to ISO 8846, SAE J1171 & United States Coast Guard Requirements for Ignition Protection & Fire Resistance. • Supports up to 750 HP. • Fuel flow exceeds 140 GPH at 13.5 Volts. • Provides 14 PSI fuel pressure. • Perfect for use with one of our Carbureted Adjustable Regulators (P/N 13211, 13215) • 3/8” NPT inlet and outlet ports. • Full, 2 year, factory direct warranty. Download Installation Instructions

11110 - Marine Eliminator Fuel Pump

Tue, 07 Sep 2010 08:51:40 +0000

For additional information on this product, see the Eliminator Fuel Pump, P/N 11104 • Certifi ed to ISO 8846, SAE J1171 & United States Coast Guard Requirements for Ignition Protection & Fire Resistance. • Compatible with all pump and racing gasoline and high grade diesel fuels. • ORB-12 inlet and ORB-10 outlet ports • For EFI applications use regulator P/N 13114, carbureted P/N 13207 • 25% more flow at pressure than our Marine A1000 Fuel Pump. • Qualifi ed to run continuously for over 2,000 hours. • Full, 2 year, factory direct warranty. Carbureted Engines: up to 2300 HP - naturally aspirated up to 1700 HP - forced air induction Fuel Injected Engines: up to 1900 HP - naturally aspirated up to 1400 HP - forced air induction Download Installation Instructions

11108 - Marine A1000 Fuel Pump

Tue, 07 Sep 2010 08:51:40 +0000

For additional information on this product, see the A1000 Fuel Pump, P/N 11101 • Certifi ed to ISO 8846, SAE J1171 & United States Coast Guard Requirements for Ignition Protection & Fire Resistance. • Compatible with all pump and racing gasoline and high grade diesel fuels. • ORB-10 inlet and outlet ports. • For EFI applications use regulator P/N 13114, carbureted P/N 13207 • Qualifi ed to run continuously for over 2,000 hours. • Full, 2 year, factory direct warranty. Carbureted Engines: up to 1500 HP - naturally aspirated up to 1200 HP - forced air induction Fuel Injected Engines: up to 1300 HP - naturally aspirated up to 1000 HP - forced air induction Download Installation Instructions

31706 - 2.5'' V-Belt Crank Pulley

Tue, 07 Sep 2010 08:51:40 +0000

31705 - 4'' V-Belt Crank Pulley

Tue, 07 Sep 2010 08:51:40 +0000

31703 - V-Belt Vacuum Pump Pulley

Tue, 07 Sep 2010 08:51:40 +0000

31701 - Small Block Chevy Vacuum Pump Bracket

Tue, 07 Sep 2010 08:51:40 +0000

12334 - Dual Outlet Oil/Fuel Filter, ORB-12

Tue, 07 Sep 2010 08:51:40 +0000

New Dual Outlet Oil/Fuel Filters with secondary outlet port. The new fuel/oil filters eliminate the need for additional fittings and y-blocks allowing you to feed separate systems from one filter. • Features 10-Micron filter element. • P/N 12334 features ORB-12 inlet and outlet ports with ORB-08 secondary port. • Port plug for secondary port included.

12333 - Dual Outlet Oil/Fuel Filter, ORB-10

Tue, 07 Sep 2010 08:51:40 +0000

New Dual Outlet Oil/Fuel Filters with secondary outlet port. The new fuel/oil filters eliminate the need for additional fittings and y-blocks allowing you to feed separate systems from one filter. • Features 10-Micron filter element. • P/N 12333 features ORB-10 inlet and outlet ports with ORB-06 secondary port. • Port plug for secondary port included.

33101 - Vacuum Pump Regulator

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s new Vacuum Pump Regulator allows you to control and adjust crankcase vacuum easily and effectively without the use of shims. Simply loosen the lock nut and turn to adjust. Designed to work with the Aeromotive Vacuum Pump. • Attaches directly to the Aeromotive Vacuum Pump. (Note: Use port fitting P/N 15612) • Equipped with (2) ORB-12 Inlet and Outlet Ports. • Features a 1/8’’ gauge port. • Made from CNC-Machined Billet Aluminum Download Installation Instructions

31101 - 3-Vane Vacuum Pump

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s new Vacuum Pump features a 3-vane design and ORB-12 ports engineered to remove air, blow-by gasses and other contaminants from the crankcase of your engine. Choose from a variety of brackets and pulleys (sold separately) to fit your application. • 3-Vane Pump Design • Equipped with (2) ORB-12 Ports • Black Type II Hardcoat anodized finish for superior protection and corrosion resistance. Download Installation Instructions

15709 - 12' AN-10 Stainless Steel Braided Line

Tue, 07 Sep 2010 08:51:40 +0000

15708 - 8' AN-10 Stainless Steel Braided Line

Tue, 07 Sep 2010 08:51:40 +0000

15707 - 4' AN-10 Stainless Steel Braided Line

Tue, 07 Sep 2010 08:51:40 +0000

15706 - 12' AN-08 Stainless Steel Braided Line

Tue, 07 Sep 2010 08:51:40 +0000

15705 - 8' AN-08 Stainless Steel Braided Line

Tue, 07 Sep 2010 08:51:40 +0000

15704 - 4' AN-08 Stainless Steel Braided Line

Tue, 07 Sep 2010 08:51:40 +0000

15703 - 12' AN-06 Stainless Steel Braided Line

Tue, 07 Sep 2010 08:51:40 +0000

15702 - 8' AN-06 Stainless Steel Braided Line

Tue, 07 Sep 2010 08:51:40 +0000

15701 - 4' AN-06 Stainless Steel Braided Line

Tue, 07 Sep 2010 08:51:40 +0000

21110 - Timing Belt

Tue, 07 Sep 2010 08:51:40 +0000

1/2'' wide Neoprene with Fiberglass cord 60 groove 22.5'' L pitch - .375''

21105 - GM LT-1 Underdrive & 15 percent Alt Underdrive Pulley Kit

Tue, 07 Sep 2010 08:51:40 +0000

Includes P/N 21101 and 21104

21104 - 15 percent Alternator Underdrive Pulley

Tue, 07 Sep 2010 08:51:40 +0000

Serpentine Belt - Ford & GM

21103 - 50 percent Alternator Overdrive Pulley

Tue, 07 Sep 2010 08:51:40 +0000

Deep V Grove - Ford & GM

21102 - 32 percent Alternator Overdrive Pulley

Tue, 07 Sep 2010 08:51:40 +0000

Ford & GM

21101 - 34 percent Underdrive Pulley

Tue, 07 Sep 2010 08:51:40 +0000

Designed for use with GM LT-1 Download Installation Instructions

18603 - Ford Fuel Tank Return Line Adapter

Tue, 07 Sep 2010 08:51:40 +0000

Features an ORB-08 return port

16301 - 30 AMP Fuel Pump Wiring Kit

Tue, 07 Sep 2010 08:51:40 +0000

Download Installation Instructions

11705 - Billet Bracket for Belt Drive Pumps

Tue, 07 Sep 2010 08:51:40 +0000

Designed for use with P/N 11105 and 11115 Belt Drive Fuel Pumps

11704 - Billet Straight Bracket for Belt Drive Pumps

Tue, 07 Sep 2010 08:51:40 +0000

Designed for use with P/N 11105 and 11115 Belt Drive Fuel Pumps

21106 - Billet BBC Drive Mandrel

Tue, 07 Sep 2010 08:51:40 +0000

11601 - Fuel Pump Vibration Dampener Mounting Kit

Tue, 07 Sep 2010 08:51:40 +0000

21109 - 28 Tooth Cog Belt Pulley

Tue, 07 Sep 2010 08:51:40 +0000

Features a 3/8'' Pitch

15633 - 0-100 psi Fuel Pressure gauge

Tue, 07 Sep 2010 08:51:40 +0000

• "Dry" Fuel Pressure Gauge • 1.5'' Diameter • 0-100 PSI

15632 - 0-15 psi Fuel Pressure Gauge

Tue, 07 Sep 2010 08:51:40 +0000

• "Dry" Fuel Pressure Gauge • 1.5'' Diameter • 0-15 PSI

21108 - 14 Tooth Cog Belt Pulley

Tue, 07 Sep 2010 08:51:40 +0000

Features 3/8'' Pitch and a 1'' ID

15620 - High Flow "Y" Block

Tue, 07 Sep 2010 08:51:40 +0000

Features (1) ORB-10 Port to (2) ORB-08 Ports

14601 - 4 Port Fuel Distribution Log

Tue, 07 Sep 2010 08:51:40 +0000

Features (2) ORB-08 Ports and (2) ORB-06 Ports

13009 - Fuel Pressure Regulator Service Kit

Tue, 07 Sep 2010 08:51:40 +0000

Choose your regulator service kit from the list below by cross-referencing the kit part number with your regulator part number. Click on the part number to go to download in the Installation Instructions and Bill of Materials. It’s no secret that our customers are going to push the envelope and test the limits of their machines. These extreme conditions and the continuing evolution of fuels has led us to offer a complete line of Fuel Pressure Regulator Service Kits. Designed for the do-it-yourself enthusiast, these kits are intended for regulators that see service in these harsh environments and are subjected to the sometimes poor quality of fuels. All Regulator Service Kits include the diaphragm assembly and bolts. Depending upon application, some kits may include the seat assembly, spring or o-rings. Service Kit Regulator 13001 13101, 13109, 13151, 13159, 13114 13002 13102, 13103, 13152, 13153 13003 13105, 13155, 13106, 13107, 13115, 13116 13004 13110 13005 13201, 13205, 13211, 13215, 13251, 13255 13006 13202, 13113, 13209, 13214, 13212 13007 13203 13008 13204, 13207, 13254 13009 13301, 13351

13008 - Fuel Pressure Regulator Service Kit

Tue, 07 Sep 2010 08:51:40 +0000

13007 - Fuel Pressure Regulator Service Kit

Tue, 07 Sep 2010 08:51:40 +0000

13006 - Fuel Pressure Regulator Service Kit

Tue, 07 Sep 2010 08:51:40 +0000

13005 - Fuel Pressure Regulator Service Kit

Tue, 07 Sep 2010 08:51:40 +0000

13004 - Fuel Pressure Regulator Service Kit

Tue, 07 Sep 2010 08:51:40 +0000

13003 - Fuel Pressure Regulator Service Kit

Tue, 07 Sep 2010 08:51:40 +0000

13002 - Fuel Pressure Regulator Service Kit

Tue, 07 Sep 2010 08:51:40 +0000

13001 - Fuel Pressure Regulator Service Kit

Tue, 07 Sep 2010 08:51:40 +0000

12702 - 2.5'' T-Bolt Clamp

Tue, 07 Sep 2010 08:51:40 +0000

Can be used with the following fuel pumps and filters: Fuel Pump P/N 11103, 11106, 11156, 11211, 11212 11203, 11213, 11209, 11219, 11253, 11259 Filters P/N 12302, 12310, 12332, 12309, 12311, 12352, 12360

12305 - Billet 2'' Filter Bracket

Tue, 07 Sep 2010 08:51:40 +0000

Can be used with the following Fuel Filters: Filters P/N 12301, 12304, 12306, 12307, 12321, 12324, 12351, 12354, 12331 Also available in Platinum

11703 - Billet 2.5'' Pump/Filter Bracket

Tue, 07 Sep 2010 08:51:40 +0000

Can be used with the following Fuel Pumps and Filters Fuel Pumps P/N 11103, 11106, 11156, 11211, 11212 11203, 11213, 11209, 11219, 11253, 11259 Filters P/N 12302, 12310, 12332, 12309, 12311, 12352, 12360 Also available in Platinum

15671 - Y-Block, -06 to (2)-04

Tue, 07 Sep 2010 08:51:40 +0000

(1) AN-06 to (2) AN-04 Male Flare Y-Block. Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.

15672 - Y-Block, -08 to (2)-04

Tue, 07 Sep 2010 08:51:40 +0000

(1) AN-08 to (2) AN-04 Male Flare Y-Block. Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.

15673 - Y-Block, -08 to (2)-06

Tue, 07 Sep 2010 08:51:40 +0000

(1) AN-08 to (2) AN-06 Male Flare Y-Block. Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.

15674 - Y-Block, -08 to (2)-08

Tue, 07 Sep 2010 08:51:40 +0000

(1) AN-08 to (2) AN-08 Male Flare Y-Block. Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.

15675 - Y-Block, -10 to (2)-08

Tue, 07 Sep 2010 08:51:40 +0000

(1) AN-10 to (2) AN-08 Male Flare Y-Block. Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.

15676 - Y-Block, -10 to (2)-10

Tue, 07 Sep 2010 08:51:40 +0000

(1) AN-10 to (2) AN-10 Male Flare Y-Block. Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.

15677 - Y-Block, -12 to (2)-08

Tue, 07 Sep 2010 08:51:40 +0000

(1) AN-12 to (2) AN-08 Male Flare Y-Block. Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.

15678 - Y-Block, -12 to (2)-10

Tue, 07 Sep 2010 08:51:40 +0000

(1) AN-12 to (2) AN-10 Male Flare Y-Block. Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.

15679 - Y-Block, -12 to (2)-12

Tue, 07 Sep 2010 08:51:40 +0000

(1) AN-12 to (2) AN-12 Male Flare Y-Block. Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.

18650 - Baffled Fuel Tank Sump Box

Tue, 07 Sep 2010 08:51:40 +0000

Take advantage of Aeromotive’s leading edge engineering and design. You can keep all the benefits of our Mustang sumped fuel tank in virtually any automotive application by installing the P/N 18650 sump box. Perfect for EFI crate engine installations and early muscle cars and trucks. Download Installation Instructions

18601 - Ford Mustang Sumped Fuel Tank

Tue, 07 Sep 2010 08:51:40 +0000

For easy, bolt-on installation in EFI & carbureted applications. Ensures a constant fuel supply at the pump inlet while eliminating cavitation, vapor lock, and premature pump wear due to restrictive fuel inserts or “pick-up” tubes. There’s no need to struggle engineering a proper baffle box, welding a used, rusty tank or building a firewall to give up your cargo space for a fuel cell. • Aeromotive’s advanced EFI sump design features a large reservoir volume, floor to ceiling baffling and proprietary return ramp to ensure a constant head of calm fuel is always available at the pump’s inlet, right down to “E” empty. • Equipped with two ORB-10 outlet ports and an ORB-10 return port which can be adapted to AN-8 or AN-6 with the correct ORB reducer fitting. • Fits 86 - 98 Ford Mustang. • Bolts in the stock location with no chassis or floor pan modifications, utilizes the stock filler neck/door, fuel level sending unit and tank mounting straps. • Easily fits 79 - 86 Fox Body Mustangs, requiring the later ʻ86 - ʻ98 fuel level sending unit as the only modification. Download Installation Instructions

17119 - 3/8'' Quick Connect Sample Valve Kit

Tue, 07 Sep 2010 08:51:40 +0000

Fits most Ford Modular and GM LS Series Engines Includes Aeromotive’s Billet Fuel Sample Valve, designed to simplify installation and make fuel checks a snap! Packed with common sense features, it’s simply the best sample valve on the market. • Provides a duplicate 1/8” NPT port on the valve for installation of fuel pressure gauge or pressure sensor transducer. • Sample port is equipped with stainless steel barb fitting for extension hose and rotates 360° for ease of installation and sampling. • The “dual action”, spring loaded safety valve keeps the valve sealed when unlocked and rotates into a locked position for racing. • When a fuel sample is required, rotate to the unlocked position, press for fuel sample and release, re-lock the valve and go race.

15631 - Billet Fuel Sample Valve

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive’s Billet Fuel Sample Valve is designed to simplify installation and make fuel checks a snap! Packed with common sense features, it’s simply the best sample valve on the market. • Installs into any 1/8” NPT gauge port. • Provides a duplicate 1/8” NPT port on the valve for installation of fuel pressure gauge or pressure sensor transducer. • Sample port is equipped with stainless steel barb fitting for extension hose and rotates 360° for ease of installation and sampling. • The “dual action”, spring loaded safety valve keeps the valve sealed when unlocked and rotates into a locked position for racing. • When a fuel sample is required, rotate to the unlocked position, press for fuel sample and release, re-lock the valve and go race. Available as a 3/8’’ Quick Connect Sample Valve Kit, P/N 17119 Fits most Ford Modular and GM LS Series Engines

17113 - Ford Digital Programmable FMU System

Tue, 07 Sep 2010 08:51:40 +0000

Complete with all the necessary components for installation on your 99 - 04 Mustang GT or Cobra. Includes: • Digital Programmable FMU, P/N 16303 • Inline EFI Fuel Pump. P/N 11109 • Fuel Pressure Sensor Relocation Kit, P/N 17114 • Fuel Line Adapter Fittings, plumbing T’s, one-way check valve and all necessary wiring for easy installation.

16303 - Digital Programmable FMU

Tue, 07 Sep 2010 08:51:40 +0000

Now you can add fuel flow and pressure control to any returnless fuel system and maintain the proper air/fuel ratio under all WOT operating conditions. The new Aeromotive Digital Programmable FMU is a fully adjustable, scalable, electronic fuel pump controller. Programmable control provides new fueling solutions for cars with returnless fuel systems. • Controls auxiliary fuel pump (sold separately), mounted in-line with the stock in-tank pump. • The unique capability of the DPFMU, unlike fixed ratio mechanical FMUs, is to permit a custom pressure and flow curve for each engine application. • The DPFMU features 15 independent adjustment bands scalable across 1-30 PSI of boost or any range of engine RPM. Will also scale across any 0-5 Volt input, including mass air flow signal or throttle position. LCD readout and easy programming are built in, No laptop computer required. Also available as a complete system for late model Mustang returnless fuel systems. (P/N 17113) Download Installation Instructions Download Installation Instructions (Old 1st Generation DFMU)

17301 - Belt or Hex Drive Electric Priming Kit

Tue, 07 Sep 2010 08:51:40 +0000

If you’re considering a belt or hex drive fuel pump but are concerned with low cranking fuel pressure, Aeromotive has engineered a perfect solution. The Electric Priming Kit is suitable for fuel injected or carbureted applications and includes: • Inline EFI Fuel Pump (P/N 11109) • AN-08 inlet and AN-06 outlet pump adapter fittings • ORB-10 male / ORB-06 female adapter • Stainless Steel Braided AN Hose • All ORB fittings and AN Hose Ends • Fuel Pump Wiring Kit and complete installation instructions. Download Installation Instructions

11109 - In-Line Electric Fuel Pump

Tue, 07 Sep 2010 08:51:40 +0000

For fuel injected and carbureted applications when used with a bypass regulator. This affordable pump can support up to 500 HP naturally aspirated or 375 HP forced induction. Popular as a secondary pump, in “series” with an in-tank fuel pump, making a combined system capable of supporting up to 500 HP Forced induction. • Universal inline pump, designed for external mounting. • Submersible - custom installation required. • Rated for continuous duty applications. • Flows 325 lbs. per hour @ 13.5 Volts and 45 PSI. • 5/16” hose barb inlet and outlet are standard. • Suitable for use with Aeromotive Digital FMU P/N 16303. • Inlet can be upgraded to AN-08 using fitting P/N 15114 (sold separately) Download Installation Instructions

15107 - One-Way Check Valve - ORB-10

Tue, 07 Sep 2010 08:51:40 +0000

High flow one-way check valves designed to prevent back-flow with minimal pressure drop. Ideal to prevent drain back after the fuel pump is turned off, or when dual pumps are used and both pumps may not run simultaneously. • CNC-machined billet aluminum and Type II bright dip black anodized finish. • AN O-ring male inlet/female outlet connections allow easy installation into fuel pump outlet port without adding additional lines, hose-ends or fittings. • Suitable for use with gasoline fuels only.

15106 - One-Way Check Valve - ORB-06

Tue, 07 Sep 2010 08:51:40 +0000

14202 - Dual Action Adjustable Fuel Log - Demon

Tue, 07 Sep 2010 08:51:40 +0000

For Demon style float bowls. The new Aeromotive Fuel Log incorporates features never before available. Each carburetor inlet features a ball and socket assembly that swivels +/-20 degrees, allowing additional clearance for throttle stops, nitrous plates and other accessories; then locks in place at the desired position. The telescoping log will fit Demon (P/N 14202) carburetors. The ORB-10 inlet and outlet ports will feed the hungriest big blocks, and adapt easily to Aeromotive P/N 13212 (A2000 Bypass - gasoline) or P/N 13214 (Double Adjustable Bypass - alcohol) fuel pressure regulators. • Carburetor inlets swivel + or - 20º in all directions. • Telescoping center line 7.700” to 13.450”. • ORB-10 inlet and outlet ports. • (2) 1/8” NPT ports for gauges or pressure transducers. • 1.056 / .806” ID bore. • Type II bright dip black anodized finish. Available as a kit with regulator, gauge & fittings: 17250 - Includes A2000 Bypass, 2-port Regulator - P/N 13212 17251 - Includes Double Adjustable Bypass Regulator - P/N 13214 Watch the Video about this product.

14201 - Dual Action Adjustable Fuel Log - Holley

Tue, 07 Sep 2010 08:51:40 +0000

For 4150 or 4500 Dominator Style Float Bowls. The new Aeromotive Fuel Log incorporates features never before available. Each carburetor inlet features a ball and socket assembly that swivels +/-20 degrees, allowing additional clearance for throttle stops, nitrous plates and other accessories; then locks in place at the desired position. The telescoping log will fit 4150 or 4500 Dominator (P/N 14201) carburetors. The ORB-10 inlet and outlet ports will feed the hungriest big blocks, and adapt easily to Aeromotive P/N 13212 (A2000 Bypass - gasoline) or P/N 13214 (Double Adjustable Bypass - alcohol) fuel pressure regulators. • Carburetor inlets swivel + or - 20º in all directions. • Telescoping center line 7.700” to 13.450”. • ORB-10 inlet and outlet ports. • (2) 1/8” NPT ports for gauges or pressure transducers. • 1.056 / .806” ID bore. • Type II bright dip black anodized finish. Available as a kit with regulator, gauge & fittings: 17248 - Includes A2000 Bypass, 2-port Regulator - P/N 13212 17249 - Includes Double Adjustable Bypass Regulator - P/N 13214 Watch the Video about this product.

16306 - Billet Fuel Pump Speed Controller

Tue, 07 Sep 2010 08:51:40 +0000

For any pump, on any type of vehicle, the Aeromotive Fuel Pump Speed Controller (FPSC) minimizes fuel heating and vapor-lock problems by matching the duty cycle of the fuel pump to engine RPM. At low demand, the FPSC slows the fuel pump down, reducing the chance of suction side cavitation and vapor lock. When demand increases, the FPSC returns the fuel pump to 100% duty cycle for maximum flow. It’s like an automatic transmission for your fuel pump. • LED indicators confirm correct ignition signal hookup, verifies activation of the manual override circuit, and indicates when the circuit is providing full voltage to the pump. Avoid any device that reduces voltage to your fuel pump. Low voltage will destroy a 12V DC motor. The Aeromotive FPSC does not reduce voltage! The FPSC emits a pulse modulation signal that is harmless to the pump’s motor. • A solid-state transistor circuit, rated up to 40 amps, replaces the relays recommended in most fuel pump electrical circuits. • Adjustable, full-speed RPM threshold. • Billet 6061-T651 aircraft aluminum housing, protected with a beautiful bright dip black anodized finish. • Complete installation kit includes: wire, override toggle switch, installation hardware, and instructions. Download Installation Instructions Download Instructions for P/N 16302 (gen1 FPSC)

16304 - Carbureted Float Bowl Sensor

Tue, 07 Sep 2010 08:51:40 +0000

The Aeromotive Carbureted Float Bowl Sensor pioneered a new frontier in carburetor tuning and data acquisition. Awarded the prestigious SEMA Best New Racing/Performance Product in 2005, the sensor provides data never before available for carbureted applications. Anybody can measure carburetor inlet pressure, now “YOU” can measure the volume of fuel in the float bowl. • Patented design outputs 0-5 Volts relative to fuel mass in the carburetor float bowl, working in conjunction with existing data acquisition. • Allows the user to determine and record the amount of fuel inside the float bowl of a conventional racing carburetor without interfering with the float bowl volume. • Sensor is small and light, mounting externally with no drilling or tapping of the float bowl required. Download Installation Insructions

15208 - Demon Carb AN-08 Float Bowl Fitting

Tue, 07 Sep 2010 08:51:40 +0000

Fits Barry Grant Demon Carburetor Float Bowls - AN-08 to 9/16'' x 24 Thread More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15207 - Demon Carb AN-06 Float Bowl Fitting

Tue, 07 Sep 2010 08:51:40 +0000

Fits Barry Grant Demon Carburetor Float Bowls - AN-06 to 9/16'' x 24 Thread More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15125 - Ford 1/2'' Male Spring-Lock to AN-08 Feed Line Adapter

Tue, 07 Sep 2010 08:51:40 +0000

More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15124 - Ford 1/2'' Male Spring-Lock to AN-06 Feed Line Adapter

Tue, 07 Sep 2010 08:51:40 +0000

15123 - Ford 3/8'' Male Spring-Lock to AN-06 Feed Line Adapter

Tue, 07 Sep 2010 08:51:40 +0000

15649 - AN-06 to AN-08 Reverse Port Adapter

Tue, 07 Sep 2010 08:51:40 +0000

15121 - 3/8'' Quick Connect with AN-08 Access Port

Tue, 07 Sep 2010 08:51:40 +0000

3/8'' Quick Connect with AN-08 Fuel Access Port and 1/8'' NPT Gauge Port More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15120 - 5/16'' Quick Connect with AN-06 Access Port

Tue, 07 Sep 2010 08:51:40 +0000

5/16'' Quick Connect with AN-06 Fuel Access Port and 1/8'' NPT Gauge Port More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15642 - Cutoff ORB-10 to AN-12 Male Flare Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15641 - Cutoff ORB-08 to AN-10 Male Flare Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15636 - ORB-06 to AN-06 Male Flare Banjo Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15201 - Holley AN-06 Float Bowl Fitting

Tue, 07 Sep 2010 08:51:40 +0000

Fits most Holley Carburetor Float Bowls - AN-06 to 7/8'' x 20 Thread More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15119 - 2x Male AN-08 x ORB-06 Port Tee with Gauge Port

Tue, 07 Sep 2010 08:51:40 +0000

Includes 1/8'' NPY Gauge Port More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15118 - 3/8'' Female Quick Connect to ORB-08 Port

Tue, 07 Sep 2010 08:51:40 +0000

15117 - 5/16'' Female Quick Connect to ORB-06 Port

Tue, 07 Sep 2010 08:51:40 +0000

15116 - 3/8'' Male Quick Connect to (2) ORB-08 Male Flare T

Tue, 07 Sep 2010 08:51:40 +0000

GM Pressure Line More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15114 - AN-08 Inlet Male Flare Adapter for Inline EFI Pump

Tue, 07 Sep 2010 08:51:40 +0000

For use with the P/N 11109 Fuel Pump More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15115 - 05-06 Ford 4.6L Sensor Adapter Log

Tue, 07 Sep 2010 08:51:40 +0000

Ford Fuel Pressure Sensor Adapter Log Contains (2) ORB-08 Ports More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15112 - 96-04 Ford 4.6L Sensor Adapter Log

Tue, 07 Sep 2010 08:51:40 +0000

15105 - 5/8'' Female to AN-10 Male

Tue, 07 Sep 2010 08:51:40 +0000

GM LT-1 Fuel Filter Outlet More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15104 - 3/8'' Male Quick Connect to AN-10 Male

Tue, 07 Sep 2010 08:51:40 +0000

GM LT-1 Fuel Filter Inlet More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15103 - 5/16'' Male Quick Connect to AN-06 Male

Tue, 07 Sep 2010 08:51:40 +0000

Ford OE Fuel Filter Inlet and Outlet More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15102 - 1/2'' Female Spring-Lock to (2) AN-08 Male T

Tue, 07 Sep 2010 08:51:40 +0000

1986-2006 Ford OE Supply Line More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15101 - 3/8'' Female Spring-Lock to AN-06 Male

Tue, 07 Sep 2010 08:51:40 +0000

Ford OE Return Line More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15681 - Swivel ORB-08 to ORB-06 Adapter Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15680 - Swivel ORB-12 to ORB-12 Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15640 - Swivel ORB-10 to ORB-10 Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15639 - Swivel ORB-10 to ORB-10 with ORB-06 Port Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15638 - Swivel ORB-08 to ORB-10 Adapter Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15206 - A2000 Pump Fitting Kit

Tue, 07 Sep 2010 08:51:40 +0000

For use with the A2000 Fuel Pump - P/N 11202 Contains: (2) AN-10 to AN-10 Male Flare Fittings - P/N 15608 (1) AN-08 to AN-08 Male Flare Fittings - P/N 15607 O-Rings More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15205 - Regulator P/N 13205 Fitting Kit

Tue, 07 Sep 2010 08:51:40 +0000

Contains (3) 3/8'' to AN-08 Male Flare Adapter Fittings - P/N 15616 More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15204 - Regulator P/N 13205 Fitting Kit

Tue, 07 Sep 2010 08:51:40 +0000

Contains (3) 3/8'' to AN-06 Male Flare Adapter Fittings - P/N 15615 More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15203 - Regulator P/N 13109 or 13201 Fitting Kit

Tue, 07 Sep 2010 08:51:40 +0000

Contains (3) AN-08 to AN-08 Male Flare Fittings - P/N 15607 More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15202 - Regulator P/N 13203 Fitting Kit - Dual Carb

Tue, 07 Sep 2010 08:51:40 +0000

For Regulator P/N 13202 in dual carburetor setups. Contains: • (4) AN-06 to AN-06 Male Flare Fittings - P/N 15606 • (1) AN-10 to AN-10 Male Flare Fittings - P/N 15608 * (1) AN-10 Port Plug - P/N 15617 More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15108 - Regulator P/N 13109 or 13201 Fitting Kit

Tue, 07 Sep 2010 08:51:40 +0000

Contains (3) AN-06 to AN-06 Male Flare Fittings - P/N 15606 More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. The Aeromotive line of custom fittings, adapters and hose-ends are a step above the norm, offering uncompromised fuel flow and positive sealing. Constructed of 6061 T6 aircraft grade aluminum or stainless steel, each component is CNC-machined for precision fit and unmatched flow. All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics. We offer a complete line of hard to find fittings from OEM specific connections to AN adapters. All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15624 - ORB-12 O-Ring, 10-Pack

Tue, 07 Sep 2010 08:51:40 +0000

Fuel Resistant Nitrile O-Rings - Pack of 10 All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15623 - ORB-10 O-Ring, 10-Pack

Tue, 07 Sep 2010 08:51:40 +0000

Fuel Resistant Nitrile O-Rings - Pack of 10 All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15622 - ORB-08 O-Ring, 10-Pack

Tue, 07 Sep 2010 08:51:40 +0000

Fuel Resistant Nitrile O-Rings - Pack of 10 All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15621 - ORB-06 O-Ring, 10-Pack

Tue, 07 Sep 2010 08:51:40 +0000

Fuel Resistant Nitrile O-Rings - Pack of 10 All Aeromotive fittings and adapters are fully compatible with gasoline and alcohol based fuels.

15647 - AN-12 Fuel Cell Bulkhead Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15646 - AN-10 Fuel Cell Bulkhead Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15645 - AN-08 Fuel Cell Bulkhead Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15644 - AN-06 Fuel Cell Bulkhead Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15637 - ORB-08 Port Plug with 1/8'' NPT Port

Tue, 07 Sep 2010 08:51:40 +0000

15626 - ORB-06 Port Plug

Tue, 07 Sep 2010 08:51:40 +0000

15618 - ORB-08 Slim Line Port Plug

Tue, 07 Sep 2010 08:51:40 +0000

15617 - ORB-10 Port Plug

Tue, 07 Sep 2010 08:51:40 +0000

15614 - AN-08 to AN-06 Male Flare Union Reducer Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15611 - AN-12 to AN-12 Male Flare Union Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15604 - AN-10 to AN-10 Male Flare Union Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15603 - AN-08 to AN-08 Male Flare Union Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15602 - AN-06 to AN-06 Male Flare Union Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15635 - AN-06 to 5/16'' Barb Adapter Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15628 - ORB-04 to 5/16'' Barb Adapter Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15627 - ORB-06 to 7mm Barb Adapter Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15665 - AN-08 Male ORB to 90 Degree Hose End

Tue, 07 Sep 2010 08:51:40 +0000

15658 - 90 Degree AN-10 Hose End

Tue, 07 Sep 2010 08:51:40 +0000

15655 - 90 Degree AN-08 Hose End

Tue, 07 Sep 2010 08:51:40 +0000

15652 - 90 Degree AN-06 Hose End

Tue, 07 Sep 2010 08:51:40 +0000

15657 - 45 Degree AN-10 Hose End

Tue, 07 Sep 2010 08:51:40 +0000

15654 - 45 Degree AN-08 Hose End

Tue, 07 Sep 2010 08:51:40 +0000

15651 - 45 Degree AN-06 Hose End

Tue, 07 Sep 2010 08:51:40 +0000

15656 - Straight AN-10 Hose End

Tue, 07 Sep 2010 08:51:40 +0000

15653 - Straight AN-06 Hose End

Tue, 07 Sep 2010 08:51:40 +0000

15650 - Straight AN-06 Hose End

Tue, 07 Sep 2010 08:51:40 +0000

15629 - ORB-04 to AN-04 Male Flare Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15613 - ORB-12 to AN-10 Male Flare Reducer Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15612 - ORB-12 to AN-12 Male Flare Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15610 - ORB-10 to AN-08 Male Flare Reducer Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15609 - ORB-10 to AN-06 Male Flare Reducer Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15608 - ORB-10 to AN-10 Male Flare Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15607 - ORB-08 to AN-08 Male Flare Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15606 - ORB-06 to AN-06 Male Flare Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15605 - ORB-08 to AN-06 Male Flare Reducer Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15630 - 1/16'' NPT to 5/32'' Hose Barb SS Vacuum-Boost Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15619 - 1/16'' NPT to AN-04 Male Flare SS Vacuum-Boost Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15616 - 3/8" NPT to AN-08 Male Flare Adapter Fitting

Tue, 07 Sep 2010 08:51:40 +0000

15615 - 3/8'' NPT to AN-06 Male Flare Adapter Fitting

Tue, 07 Sep 2010 08:51:40 +0000

14107 - Unmachined Raw Extrusion Fuel Rail

Tue, 07 Sep 2010 08:51:40 +0000

Unmachined Raw Extrusion 17 3/4'' length 5/8'' ID 6061 T6 Aircraft Grade Billet Aluminum Call our tech lines for more details.

14149 - Edelbrock Ford Windsor Intake 29285 Fuel Rail Kit

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits Edelbrock® Ford Windsor Intake (29285) - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14148 - Edelbrock SBC Victor "E" Fuel Rail Kit

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits Edelbrock® Victor "E" Small Block Chevy Manifold - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14146 - Chrysler 5.7L & 6.1L HEMI Fuel Rail Kit

Tue, 07 Sep 2010 08:51:40 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 5.7L and 6.1L HEMI engines - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14137 - 04-06 Subaru 2.5L STi Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 2004-2006 Subaru 2.5L STi - Return-Style System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14135 - 04-06 Subaru 2.0L WRX Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 2004-2006 Subaru 2.0L WRX - Return-Style System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14136 - 04-06 Subaru 2.5L STi Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 2004-2006 Subaru 2.5L STi - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14134 - 04-06 Subaru 2.0L WRX Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 2004-2006 Subaru 2.0L WRX - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14132 - 03-07 Mitsubishi EVO Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 2003-2007 Mitsubishi EVO - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14105 - 90-99 Mitsubishi 4G63 Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 1990-1999 Mitsubishi 4G63 engines - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14112 - 94-01 Acura Integra Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 1994-2001 Acura Integra - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14129 - 99-03 1/2 GM LS1 Corvette Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 1999-2003 1/2 GM LS1 Corvette - Return-Style System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14128 - 99-04 GM LS1 Corvette Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 1999-2004 GM LS1 Corvette - Returnless System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14139 - 04 GM LS1 GTO Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 2004 GM LS1 GTO - Returnless System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14139 - 98-02 GM LS1 F-Body Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 1998-2002 GM LS1 F-Body - Returnless System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14147 - Edelbrock® LS1 Intake Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits the Edelbrock® LS1 Intake - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14142 - GM LS7 Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits GM LS7 - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14131 - 96-07 GM Supercharged 3.8L Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 1996-2007 GM Supercharged 3.8L - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14115 - GM LS3/L76 Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits GM LS3/L76 - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14114 - 05-06 GM LS2 Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 2005-2006 GM LS2 - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14113 - 05-06 Cadillac Northstar Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 2005-2006 GM Cadillac Northstar - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion.

14106 - 01-05 GM LS6 Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 2001-2005 GM LS6 - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14106 - 97-04 GM LS1 Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 1997-2004 GM LS1 - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14144 - 07-09 5.4L GT500 Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 2007-2009 5.4L Ford Mustang GT500 - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14145 - 07-09 5.4L GT500 Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 2007-2009 5.4L Ford Mustang GT500 - Returnless System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14118 - 97-05 5.4L 2-valve Truck & SUV Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 1997-2005 Ford 5.4L 2-valve Trucks & SUVs - Return-Style System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14127 - 99-04 5.4L Lightning/Harley Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 1999-2004 5.4L Ford Lightning & Harley - Return-Style System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14117 - 97-05 5.4L 2-valve Truck & SUV Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 1997-2005 Ford 5.4L 2-valve Trucks & SUVs - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14110 - 99-04 5.4L Lightning/Harley Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 1999-2004 5.4L Ford Lightning & Harley Trucks - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14101 - 86-95 5.0L GT & Cobra Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

14102 - 86-95 5.0L GT & Cobra Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 1986-1995 5.0L Ford Mustang GT & Cobra - Return-Style System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14124 - 05-09 4.6L 3-valve GT Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 2004-2009 3-valve Ford Mustang GT - Returnless System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14122 - 98 1/2-04 4.6L DOHC Cobra Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 1998 1/2-2004 DOHC Ford Mustang Cobra - Returnless System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14120 - 96-98 1/2 4.6L DOHC Cobra Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 1996-1998 1/2 DOHC Ford Mustang Cobra - Return-Style System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14125 - 96-98 4.6L 1/2 SOHC GT Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 1996-1998 1/2 SOHC Ford Mustang GT - Return-Style System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14119 - 98 1/2-04 4.6L SOHC GT Fuel Rail System

Tue, 07 Sep 2010 08:51:41 +0000

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box. Fits 1998 1/2-2004 SOHC Ford Mustang GT - Returnless System Each Billet Fuel Rail System is comprised of: • High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets. • Billet Adjustable Regulator or Fuel Pressure Sensor Adapter. • All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends. • Stainless Steel braided fuel lines. • Custom OEM fuel supply and return line adapter fittings, as required. For more information on the fuel rails, see the corresponding fuel rail kit for your applications. Download Installation Instructions

14116 - 05-09 4.6L 3-valve GT Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 2005-2009 3-valve Ford Mustang GT - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14111 - 98 1/2-04 4.6L DOHC Cobra Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 1998 1/2-2004 DOHC Ford Mustang Cobra - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14104 - 96-98 1/2 4.6L DOHC Cobra Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 1996-1998 1/2 DOHC Ford Mustang Cobra - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

14103 - 96-04 4.6L SOHC GT Fuel Rail Kit

Tue, 07 Sep 2010 08:51:41 +0000

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits 1996-2004 SOHC Ford Mustang GT - Rails Only • ORB-08 Ports with compact connections and positive, leak-free sealing. • Full 5/8” ID through bore, capable of supporting up to 3,000 HP. • Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. • Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. • Additional inlet/outlet ports are provided where required for plumbing convenience. • CNC-machined, billet aluminum construction for unequaled fit and finish. • Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of nstallation. • Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

12635 - 40 Micron Element for ORB-10 Filters

Tue, 07 Sep 2010 08:51:41 +0000

Commonly the most overlooked component in a fuel system, filter neglect can be the most costly. If not cleaned or replaced regularly, filter elements can become clogged resulting in reduced fuel flow, engine performance and ultimately, fuel pump or even worse, engine damage. By simply replacing and/or cleaning your filter elements regularly, you can avoid costly repairs to your fuel system and ensure peak engine performance. Aeromotive recommends annual inspection and service of filter elements. This includes replacing 10-micron fabric elements and cleaning or replacing 100-micron stainless steel elements. Severe duty applications or newly installed systems may require more frequent maintenance. How do you know what element you need for your filter? Several Aeromotive filters share the same housing, but the elements inside may be drastically different and putting the wrong filter or element in the wrong place could be costly for your fuel pump or your engine. To find out, look inside the inlet of the filter. Stamped on the top of the element is the micron rating. (See figure 1 below) This will tell you what element you need for your filter. For Filter P/N's: 12335

12318 - 100 Micron Element for Canister Filters

Tue, 07 Sep 2010 08:51:41 +0000

12616 - 100 Micron Element for 3/8'' NPT Filters

Tue, 07 Sep 2010 08:51:41 +0000

12610 - 10 Micron Element for ORB-12 Filters

Tue, 07 Sep 2010 08:51:41 +0000

12608 - 10 Micron Element for Canister Filters

Tue, 07 Sep 2010 08:51:41 +0000

12604 - 100 Micron Element for ORB-10 Filters

Tue, 07 Sep 2010 08:51:41 +0000

12603 - 40 Micron Element for 3/8 NPT Filters

Tue, 07 Sep 2010 08:51:41 +0000

12602 - 100 Micron Element for ORB-12 Filters

Tue, 07 Sep 2010 08:51:41 +0000

12601 - 10 Micron Element for ORB-10 Filters

Tue, 07 Sep 2010 08:51:41 +0000

12332 - ORB-12 Shutoff Valve Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

Ever take a fuel bath when changing your filter? We have a solution! Cleaning and replacing you filter elements used to mean draining your gas tank. The new Aeromotive Shutoff Valve Fuel Filters allow you to shutoff fuel flow and replace your filter elements with little or no fuel loss. Both feature 100 micron stainless steel elements and are recommended for use between the fuel cell or sumped tank and the fuel pump inlet. • ORB-12 ports • 100 micron stainless steel (coarse) cleanable element. • Proprietary stainless steel shutoff valve design. • Type II bright dip black anodized assembly and red anodized billet aluminum shutoff valve handle. • Perfect for pre-pump filtration. Watch the video about this product.

12331 - ORB-10 Shutoff Valve Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

Ever take a fuel bath when changing your filter? We have a solution! Cleaning and replacing you filter elements used to mean draining your gas tank. The new Aeromotive Shutoff Valve Fuel Filters allow you to shutoff fuel flow and replace your filter elements with little or no fuel loss. Both feature 100 micron stainless steel elements and are recommended for use between the fuel cell or sumped tank and the fuel pump inlet. • ORB-10 ports • 100 micron stainless steel (coarse) cleanable element. • Proprietary stainless steel shutoff valve design. • Type II bright dip black anodized assembly and red anodized billet aluminum shutoff valve handle. • Perfect for pre-pump filtration. Watch the video about this product.

12319 - 100 Micron, Red/Black Canister Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

When an in-line fuel filter just won't work, these canister fuel filters are engineered to provide maximum flow with limited pressure drop in a canister style filter. • High-flow 100-micron stainless steel (coarse) cleanable element. Flows 1,500 lb/hr with a pressure drop of less than 1 PSI. • 3/8” NPT ports. • 6.125” tall x 3.75” diameter

12318 - 100 Micron, Red/Polished Canister Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

12317 - 10 Micron, Red/Black Canister Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

When an in-line fuel filter just won't work, these canister fuel filters are engineered to provide maximum flow with limited pressure drop in a canister style filter. • High-flow 10-micron fabric (fine) element. Flows 1,500 lb/hr with a pressure drop of less than 1 PSI. • 3/8” NPT ports. • 6.125” tall x 3.75” diameter

12308 - 10 Micron, Red/Polished Canister Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

When an in-line fuel filter just won't work, these canister fuel filters are engineered to provide maximum flow with limited pressure drop in a canister style filter. • High-flow 10-micron fabric (fine) element. Flows 1,500 lb/hr with a pressure drop of less than 1 PSI. • 3/8” NPT ports. • 6.125” tall x 3.75” diameter

12310 - Pro-Series 10 Micron, ORB-12 Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

12302 - Pro-Series 100 Micron, ORB-12 Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

12316 - SS Series 100-Micron Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

12303 - SS Series 40-Micron Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

12335 - 40 Micron, ORB-10 Red Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

An inexpensive insurance policy to protect your investment. Proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 - 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you’ve come to expect from all Aeromotive components. • Designed to stand up to the destructive properties of alcohol based fuels, including ethanol and methanol. • High-flow, 40-micron stainless steel, cleanable element. • ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings & Adapters) • Compact size: 5.5” long x 2” diameter. • Features an anodized bright dip red finish for a corrosion resistant, show car quality appearance.

12324 - 100 Micron, ORB-10 Black Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

An inexpensive insurance policy to protect your investment. Proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 - 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you’ve come to expect from all Aeromotive components. • High-flow, 100-micron stainless steel (coarse) cleanable element. • Flows 2,000 lb/hr with a pressure drop of less than 1 PSI. • Compact size: 5.5” long x 2” diameter • ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings & Adapters) • All filter assemblies feature an O-ring for positive sealing in high pressure applications. • CNC-machined from 6061-T6 aircraft aluminum. • Bright dip black anodized finish for a corrosion resistant, show car quality appearance. 100-micron filters are designed for use between the fuel tank and the fuel pump to protect the pump.

12304 - 100 Micron, ORB-10 Red Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

An inexpensive insurance policy to protect your investment. Proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 - 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you’ve come to expect from all Aeromotive components. • High-flow, 100-micron stainless steel (coarse) cleanable element. • Flows 2,000 lb/hr with a pressure drop of less than 1 PSI. • Compact size: 5.5” long x 2” diameter • ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings & Adapters) • All filter assemblies feature an O-ring for positive sealing in high pressure applications. • CNC-machined from 6061-T6 aircraft aluminum. • Bright dip red anodized finish for a corrosion resistant, show car quality appearance. 100-micron filters are designed for use between the fuel tank and the fuel pump to protect the pump.

12321 - 10 Micron, ORB-10 Black Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

An inexpensive insurance policy to protect your investment. Proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 - 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you’ve come to expect from all Aeromotive components. • High-flow, 10-micron fabric (fine) replaceable element. • Flows 2,000 lb/hr with a pressure drop of less than 1 PSI. • Compact size: 5.5” long x 2” diameter • ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings & Adapters) • All filter assemblies feature an O-ring for positive sealing in high pressure applications. • CNC-machined from 6061-T6 aircraft aluminum. • Bright dip black anodized finish for a corrosion resistant, show car quality appearance. 10-micron filters may ONLY be used after the fuel pump to protect your injectors or carburetor. Fabric elements not suitable for use in E85 or alcohol applications.

12301 - 10 Micron, ORB-10 Red Fuel Filter

Tue, 07 Sep 2010 08:51:41 +0000

An inexpensive insurance policy to protect your investment. Proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 - 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you’ve come to expect from all Aeromotive components. • High-flow, 10-micron fabric (fine) replaceable element. • Flows 2,000 lb/hr with a pressure drop of less than 1 PSI. • Compact size: 5.5” long x 2” diameter • ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings & Adapters) • All filter assemblies feature an O-ring for positive sealing in high pressure applications. • CNC-machined from 6061-T6 aircraft aluminum. • Bright dip red anodized finish for a corrosion resistant, show car quality appearance. 10-micron filters may ONLY be used after the fuel pump to protect your injectors or carburetor. Fabric elements not suitable for use in E85 or alcohol applications.

13116 - Honda/Acura Billet Adjustable Regulators

Tue, 07 Sep 2010 08:51:41 +0000

Billet adjustable regulators specifically designed for Honda and Acura engines to provide fully adjustable base fuel pressure. These egulators are direct bolt-on for engines with the factory fuel rail or aftermarket fuel rails designed with mounting provisions for the stock regulator. • Adjustable from 30-70 PSI. • Connects directly to the stock fuel rail and return line. • Perfect for use with the factory fuel pump, yet flows enough for larger pumps like the Aeromotive A1000. • The same unrivaled, Aeromotive fuel pressure control preferred by the top racers and tuners, in a Honda specific, bolt-on package. • Fuel pressure rises on a 1:1 ratio when referencing boost. • 1/8” NPT gauge port. P/N 13115 (98-01 2.3L VTEC) 98 - 02 Accord 4 cyl 96 - 97 Del Sol Si 00 - 04 S2000 98 - 99 CL 2.3L P/N 13116 (92-97 1.6L VTEC) 86 - 89 Accord LXi/SEi 90 - 93 Accord 92 - 95 Civic 99 - 00 Civic Si 93 - 95 Del Sol S/Si 94 - 97 Del Sol VTEC 89 - 91 Prelude Si 94 - 01 Integra Download Installation Instructions

13115 - Honda/Acura Billet Adjustable Regulator

Tue, 07 Sep 2010 08:51:41 +0000

13103 - Ford Rail Mount Regulator

Tue, 07 Sep 2010 08:51:41 +0000

Adjustable billet fuel pressure regulators designed to handle the demands of the Ford 4.6L, 5.0L and 5.4L engines. Installs easily on the stock factory fuel rail. (see applications below) • Adjustable from 30-70 PSI. • Fuel pressure rises on a 1:1 ratio when referencing boost. • 1/8” NPT gauge port. • Stainless steel spring, custom-designed for precise fuel control. • Installation kit includes O-rings and gaskets. P/N 13102 94 - 98 1/2 4.6L 94 - 95 5.0L P/N 13103 86 - 93 5.0L Download Installation Instructions

13102 - Ford Rail Mount Regulator

Tue, 07 Sep 2010 08:51:41 +0000

Adjustable billet fuel pressure regulators designed to handle the demands of the Ford 4.6L, 5.0L and 5.4L engines. Installs easily on the stock factory fuel rail. (see applications below) • Adjustable from 30-70 PSI. • Fuel pressure rises on a 1:1 ratio when referencing boost. • 1/8” NPT gauge port. • Stainless steel spring, custom-designed for precise fuel control. • Installation kit includes O-rings and gaskets. P/N 13102 94 - 98 1/2 4.6L 94 - 95 5.0L P/N 13103 86 - 93 5.0L Download Installation Instructions

13107 - GM LT-1 Regulator

Tue, 07 Sep 2010 08:51:41 +0000

Originally developed with the GM LT-1 engine specs in mind, these regulators were designed to keep these cars performing at their peak potential. These rail mount EFI regulators fit a variety of factory GM vehicles. See a list of applications below: • Adjustable from 30-70 PSI. • Fuel pressure rises on a 1:1 ratio when referencing boost. • 1/8” NPT gauge port. • Stainless steel spring, custom-designed for precise fuel control. • A true billet regulator, CAD designed and CNC-machined. • Return adapter may be replaced with P/N 15606 for a -06 return line. (sold separately) P/N 13106 92 - 96 Corvette GM Ram-Jet 350 EFI Crate Engine P/N 13107 94 - 96 Impala 94 - 97 F Body Camaro/Firebird GM 3.1L & 3.4L V6 engines Download Installation Instructions

13106 - GM LT-1 Regulator

Tue, 07 Sep 2010 08:51:41 +0000

13214 - Double-Adjustable Bypass, 2-Port Regulator

Tue, 07 Sep 2010 08:51:41 +0000

Revolutionary design provides two independent pressure djustments; one adjustment for idle and one for wide open throttle. Engineered for use with variable volume pumps tied to engine RPM. This regulator creates the smoothest and most repeatable fuel curve from idle to wide open throttle of any bypass system. • ORB-10 return port. • 1/8” NPT gauge port. • Provides superior pressure control and flow when installed before the carburetor or after a fuel log. • P/N 13214 available with fuel log P/N 14201 or 14202, fittings and gauge as P/N 17249 or 17251. Download Installation Instructions

13209 - Double-Adjustable Bypass Regulator

Tue, 07 Sep 2010 08:51:41 +0000

Revolutionary design provides two independent pressure adjustments; one adjustment for idle and one for wide open throttle. Engineered for use with variable volume pumps tied to engine RPM. This regulator creates the smoothest and most repeatable fuel curve from idle to wide open throttle of any bypass system. • ORB-10 return port. • P/N 13209 provides (1) ORB-08 inlet and (3) ORB-08 outlet ports. • Can be configured for single or dual carbureted engines and provides superior pressure control and flow when installed before the carburetor or after a fuel log. • Also available with a single inlet port for fuel logs. (P/N 13214) - provides ORB-10 inlet and return ports. Download Installation Instructions

13208 - Pro-Stock, 4-Port Regulator

Tue, 07 Sep 2010 08:51:41 +0000

Track-tested by record setting, professional racers, the Aeromotive Pro Stock Regulators were designed to be used with the Aeromotive A2000 Fuel Pump (P/N 11202) in either single or dual carburetor applications. Utilizing a new stainless steel valve, aluminum bronze seat, and an innovative opposed-spring design, the Pro Stock Regulators are engineered to be the quickest responding, most reliable, highest flowing regulators on the market. • Adjustable from 4-8 PSI. • ORB-12 inlet port. (Includes AN-12 to AN-10 male flare reducer fitting) • P/N 13208 provides (4) ORB-06 outlet ports. • 1/8” NPT gauge port. • Includes mounting bracket. Download Installation Instructions

13210 - Pro-Stock, 2-Port Regulator

Tue, 07 Sep 2010 08:51:41 +0000

Track-tested by record setting, professional racers, the Aeromotive Pro Stock Regulators were designed to be used with the Aeromotive A2000 Fuel Pump (P/N 11202) in either single or dual carburetor applications. Utilizing a new stainless steel valve, aluminum bronze seat, and an innovative opposed-spring design, the Pro Stock Regulators are engineered to be the quickest responding, most reliable, highest flowing regulators on the market. • Adjustable from 4-8 PSI. • ORB-12 inlet port. (Includes AN-12 to AN-10 male flare reducer fitting) • P/N 13210 provides (2) ORB-08 outlet ports. • 1/8” NPT gauge port. • Includes mounting bracket. Also available in a 4-port version. See P/N 13208 Download Installation Instructions

13224 - A1000, 4-Port Carbureted Bypass Regulator

Tue, 07 Sep 2010 08:51:41 +0000

The A1000 Bypass Regulators were designed for use with our A1000 and Eliminator Fuel Pumps or similar style EFI pumps in a carbureted application. These regulators are perfect for naturally aspirated or “blow-through” supercharged engines. • Base fuel pressure adjustable from 3-15 PSI. • (1) ORB-10 inlet port and (1) ORB-08 return port. • P/N 13224 provides (4) ORB-06 outlet ports and 1/8” NPT gauge port. • Fuel pressure rises on a 1:1 ratio when referencing boost. • Bypass design provides the ultimate, dynamic fuel delivery system. • Ideal for converting from fuel injection to carburetion using the stock, in-tank pump. • EFI conversions will require a larger-than-stock return line for proper low pressure control. Note: Requires AN-08 return line with A1000 Fuel Pump. For Eliminator applications use P/N 15641 to adapt AN-10 return line to the ORB-08 return port on regulator.

13204 - A1000 Carbureted Bypass Regulator

Tue, 07 Sep 2010 08:51:41 +0000

The A1000 Bypass Regulator was designed for use with our A1000 Fuel Pump or similar style EFI pumps in a carbureted application. This regulator is perfect for naturally aspirated or “blow-through” supercharged engines. • Base fuel pressure adjustable from 3-15 PSI. • (1) ORB-10 inlet port and (1) ORB-08 return port. • P/N 13204 provides (2) ORB-06 outlet ports and 1/8” NPT gauge port. • Fuel pressure rises on a 1:1 ratio when referencing boost. • Bypass design provides the ultimate, dynamic fuel delivery system. • Ideal for converting from fuel injection to carburetion using the stock, in-tank pump. • EFI conversions will require a larger-than-stock return line for proper low pressure control. Note: Requires AN-08 return line from bottom of regulator back to top of the tank. Download Installation Instructions

13203 - A4 Carbureted Regulator

Tue, 07 Sep 2010 08:51:41 +0000

The only four-port regulator on the market that uses a “soft-seat” design, eliminating pressure creep at idle and, if used, on a throttle stop. Used by many of the best “Super” class racers in the world. This exclusive design ensures the precise pressure control needed for more consistent E.T.s. • Adjustable from 5-15 PSI. • Gasoline and alcohol compatible. • Standard static flow design, no return line required. • (4) ORB-06 outlet ports and 1/8” NPT gauge port. • (2) ORB-10 inlet ports for plumbing flexibility. Download Installation Instructions

13212 - A2000, 2-Port Bypass Regulator

Tue, 07 Sep 2010 08:51:41 +0000

Dynamic flow and rock steady pressure make this regulator perfect for naturally aspirated or carbureted blow-through applications. The A2000 Bypass Regulator provides unmatched boost reference and high flow capacity. Compatible with any high volume electric or mechanical fuel pump. • Adjustable from 2-20 PSI. • Bypass design provides the ultimate, dynamic fuel delivery system. (Requires AN-10 return line) • Fuel pressure rises on a 1:1 ratio when referencing boost. • ORB-10 inlet and return ports. • P/N 13212 provides (1) ORB-10 outlet port. • P/N 13212 available with fuel log P/N 14201 or 14202, fittings and gauge as P/N 17248 or 17250. Note: High pressure, boost reference applications require high volume, high pressure fuel pumps. EFI capable, electric or mechanical pumps like the Aeromotive Pro-Series (P/N 11102), Eliminator (P/N 11104), or Belt Drive Fuel Pump (P/N 11105) are strongly recommended. Download Installation Instructions

13202 - A2000 Bypass Regulator

Tue, 07 Sep 2010 08:51:41 +0000

Dynamic flow and rock steady pressure make this regulator perfect for naturally aspirated or carbureted blow-through applications. The A2000 Bypass Regulator provides unmatched boost reference and high flow capacity. Compatible with any high volume electric or mechanical fuel pump. • Adjustable from 2-20 PSI. • Bypass design provides the ultimate, dynamic fuel delivery system. (Requires AN-10 return line) • Fuel pressure rises on a 1:1 ratio when referencing boost. • ORB-10 inlet and return ports. • P/N 13202 provides (4) ORB-08 outlet ports. Note: High pressure, boost reference applications require high volume, high pressure fuel pumps. EFI capable, electric or mechanical pumps like the Aeromotive Pro-Series (P/N 11102), Eliminator (P/N 11104), or Belt Drive Fuel Pump (P/N 11105) are strongly recommended. Download Installation Instructions

13205 - SS Adjustable, 3/8'' NPT Regulator

Tue, 07 Sep 2010 08:51:41 +0000

13201 - SS Adjustable, ORB-06 Regulator

Tue, 07 Sep 2010 08:51:41 +0000

13113 - Belt/Hex Drive EFI Regulator

Tue, 07 Sep 2010 08:51:41 +0000

Ultra-High Flow EFI Regulator, adjustable from 40-100 PSI. Engineered for our Belt-Drive and Hex-Drive Fuel Pumps, the Belt Drive EFI Regulator is suitable for engines making up to 4,000 HP on gasoline and is compatible with gasoline and methanol. • Perfect for any mechanically driven EFI fuel pump developing over 200 GPH at EFI pressure. • Base pressure adjustable from 40-100 PSI. • References Vacuum/Boost on a 1:1 ratio. Includes two boost line adapters, one barbed for rubber hose, the other for AN-04 braided line. (Prevents blow-off in high boost applications) • Ports available for nitrous fuel supply, pressure gauges and transducers. • (4) ORB-08 inlet ports, (1) ORB-10 inlet port and (1) ORB-10 return port. Download Installation Instructions

13110 - Pro-Series EFI Regulator

Tue, 07 Sep 2010 08:51:41 +0000

The tuner’s choice for high horsepower EFI applications. The Pro-Series Regulator can support up to 2000 HP. For engines requiring high volume, high pressure fuel delivery the Pro-Series Boost Reference EFI Regulator is a perfect fit for serious power. • Adjustable base pressure from 30-60 PSI. • Auxiliary ports available for nitrous applications, pressure gauges and transducers. • References Vacuum/Boost on a 1:1 ratio. Includes two boost line adapters, one barbed for rubber hose, the other for AN-04 braided line. (Prevents blow-off in high boost applications) • Dedicated 1/8” NPT port. • Includes Aeromotive’s radiused tapered flare fittings: (3) ORB-08 and (1) ORB-10 inlet ports, two with AN-08 flare adapters. (1) ORB-10 return port with AN-10 flare adapter port plugs included. • Virtually indestructible electroless nickel-plating finish on the body with type II bright dip black anodized cap. Download Installation Instructions

13301 - Universal Bypass Regulator

Tue, 07 Sep 2010 08:51:41 +0000

A dual purpose, universal regulator for EFI or Carbureted and street or strip applications. Base pressure adjustable from 3 to 20 PSI with standard spring, (installed) or from 20 to 60 PSI with high pressure spring (included). Offers the full flow and rock steady fuel pressure that only a dynamic, Aeromotive bypass regulator provides. • Capable of regulating any fuel pump between 100 and 250 GPH. • Fuel pressure rises on a 1:1 ratio when referencing boost. • All ports are 3/8” NPT, with one inlet and three outlets on the main body and one return port on the bottom. • Bypass design provides the ultimate, dynamic fuel pressure control. Note: (Requires a return line to be installed from the bottom of the regulator to the top of the tank.) Download Installation Instructions

13105 - Compact EFI Regulator

Tue, 07 Sep 2010 08:51:41 +0000

Big performance in a small package. The Compact EFI Regulator is designed for applications producing up to 1,000 HP where space is at a premium. Ideal for EFI fuel delivery systems that are limited to one regulator inlet port. • Adjustable from 30-70 PSI. • Equipped with removable AN-6 male fittings for inlet and outlet ports, eliminates the need to buy additional fittings and O-rings. • Dedicated, 1/8” NPT gauge port located opposite the side inlet. • Fuel pressure rises on a 1:1 ratio when referencing boost. Download Installation Instructions

13109 - A1000-6 Injected Bypass Regulator

Tue, 07 Sep 2010 08:51:41 +0000

13101 - A1000 Injected Bypass Regulator

Tue, 07 Sep 2010 08:51:41 +0000

11206 - Billet Mechanical SBC Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

Testing... Aeromotive’s billet Small Block Chevy, block mounted pump sets a new standard for engineering to provide unparalleled durability. The six valve configuration delivers high volume while eliminating failures commonly seen in some conventional cast pumps. • For gasoline engines only. • Develops 12 PSI line pressure when used with “static” pressure regulators. (P/N 13201, 13205) • For dynamic fuel systems use bypass regulators. (P/N 13204, 13301) • ORB-10 inlet port can be rotated 285º (independent of outlet) for infinite indexing. • ORB-08 outlet port may be clocked in 60º increments. • 1/4” NPT vent port may be used to remote vent the diaphragm as required in marine applications. • High alloy steel, CNC machined lever arm provides high strength to weight ratio for durability in severe duty applications. • CNC machined 6061-T6 aircraft aluminum body for superior strength and tighter tolerances. Download Installation Instructions

11207 - Billet Pulse Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

Finally, a billet, high-flow fuel pump that can handle the demands of today’s emerging small engine market. Gasoline or alcohol, this pulse pump fuels the baddest small engines on the planet, whether they’re in a junior dragster, racing kart or snowmobile. • Pulse design delivers fuel as needed, based upon the engine’s pressure signal. • Engineered to be one of the highest flowing pulse pumps designed for use with both gasoline and alcohol engines. • To prevent corrosion, surfaces in contact with fuel are Type III hardcoated. • Billet, CNC machined design minimizes aeration and foaming, resulting in better fuel quality in the bowl. • Features indexable inlet and outlet ports and integral mounting ears. • ORB-04 to 5/16” hose-barb adapter fittings included. Download Installation Instructions

11209 - H/0 Fuel Pump - 3/8 NPT

Tue, 07 Sep 2010 08:51:41 +0000

Ideal for carbureted power plants not using a separate fuel pressure regulator. The H/O Fuel Pump is designed for engines making 200-600 HP and is ideal for street cars and mild race cars alike. Similar to our SS Fuel Pump (P/N 11203), but internally regulated to 7 PSI. • P/N 11209 features 3/8” NPT inlet and outlet ports. • Durable billet construction. • Fuel flow exceeds 90 GPH at 5 PSI and draws less than 5 amps. • Internally regulated to 7 PSI, eliminating the need for a separate regulator on most carburetors. • Rated for continuous duty, the pumping mechanism features a composite rotor, stainless steel vanes and heat treated steel top and bottom plates for durability. Download Installation Instructions

11219 - H/0 Fuel Pump - ORB-08

Tue, 07 Sep 2010 08:51:41 +0000

Ideal for carbureted power plants not using a separate fuel pressure regulator. The H/O Fuel Pump is designed for engines making 200-600 HP and is ideal for street cars and mild race cars alike. Similar to our SS Fuel Pump (P/N 11203), but internally regulated to 7 PSI. • P/N 11219 features ORB-08 inlet and outlet ports. • Durable billet construction. • Fuel flow exceeds 90 GPH at 5 PSI and draws less than 5 amps. • Internally regulated to 7 PSI, eliminating the need for a separate regulator on most carburetors. • Rated for continuous duty, the pumping mechanism features a composite rotor, stainless steel vanes and heat treated steel top and bottom plates for durability. Download Installation Instructions

11202 - A2000 Carbureted Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

From Stock Eliminator to Pro Mod, the Aeromotive A2000 is a versatile force to reckoned with and stands alone as a “big” carbureted fuel pump. The A2000 flows enough fuel to support the world’s quickest nitrous Pro-mods on gasoline, and is the industry’s only fuel pump that uses a true diaphragm controlled, adjustable bypass valve, integral to the pump. This design dampens pressure spikes, delivering smoother, more controlled flow and pressure, ensuring more consistent E.T.s and win lights. • High torque, low RPM motor design delivers more than 350 GPH free flow, while developing less current draw than any other pump in its class. • Adjustable diaphragm bypass valve outperforms ineffective poppet designs, minimizing flow loss and pressure fluctuation to the regulator and carburetor. • ORB-10 inlet and outlet ports with ORB-8 return and 1/8” NPT gauge port. • Proprietary seal design eliminates leakage. • Alcohol compatible. • Multiple bolt patterns on the bottom of the pump body fit many chassis mounting options. Download Installation Instructions

11203 - SS Fuel Pump - 3/8 NPT

Tue, 07 Sep 2010 08:51:41 +0000

A carbureted fuel pump that allows you to step up your performance by maintaining optimal line pressure and delivering high volume. The Street/Strip Pump was engineered for 200-750 HP carbureted engines making this a perfect choice for a daily driver, street rod or demanding ET-bracket race car. • P/N 11203 features 3/8” NPT inlet and outlet ports. • Perfect for use with either a Bypass Regulator (P/N 13301) or one of our Carbureted Adjustable Regulators. (P/N 13201, 13205). • Fuel flow exceeds 140 GPH at 13.5 volts. • Pump provides 14 PSI fuel pressure - perfect for cars that leave hard. • Pumping mechanism features our proprietary composite rotor, stainless steel vanes and precision ground, heat treated steel plates. • Ideal for dedicated nitrous delivery. • Alcohol compatible. • Low current draw. (under 5 amps) Download Installation Instructions

11213 - SS Fuel Pump - ORB-08

Tue, 07 Sep 2010 08:51:41 +0000

A carbureted fuel pump that allows you to step up your performance by maintaining optimal line pressure and delivering high volume. The Street/Strip Pump was engineered for 200-750 HP carbureted engines making this a perfect choice for a daily driver, street rod or demanding ET-bracket race car. • P/N 11213 features ORB-08 inlet and outlet ports. • Perfect for use with either a Bypass Regulator (P/N 13301) or one of our Carbureted Adjustable Regulators. (P/N 13201, 13205). • Fuel flow exceeds 140 GPH at 13.5 volts. • Pump provides 14 PSI fuel pressure - perfect for cars that leave hard. • Pumping mechanism features our proprietary composite rotor, stainless steel vanes and precision ground, heat treated steel plates. • Ideal for dedicated nitrous delivery. • Alcohol compatible. • Low current draw. (under 5 amps) Download Installation Instructions

11117 - Atomic Hex Drive Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

The Atomic Hex Drive Pump features the same performance you get from our Atomic Belt Drive Pump (P/N 11115), with the convenience of direct drive. The Hex Drive Fuel Pump features a hex drive shaft and mounting collar designed to be mounted and driven directly from the back of a properly prepared external oil pump or driven directly by the cam through a timing cover adapter. • Utilizes standard, 3/8” hex drive shaft and adjustable, billet mounting collar with standard 3-bolt mounting pattern and hardware. • Flows in excess of 4500 lbs/hr (over 12 GPM at 100 PSI). • Supports over 5000 HP gas, 2500 HP methanol. • Type III hard coat anodize protects the 6061 T6 aircraft aluminum alloy housing. • Features removable ports with a 1.25” inlet and ORB-12 outlet port. • EFI applications require regulator P/N 13113. Note: Electric Priming Kit available - P/N 17301 (see Accessories) Download Installation Instructions

11115 - Atomic Belt Drive Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

Designed to feed monster EFI and Carbureted engines, gasoline or alcohol. The Atomic Belt Drive Pump is engineered to be driven by a pulley and cog drive allowing the pump to be driven from your crankshaft. It can be used in high or low pressure applications. • Flows in excess of 4500 lbs/hr (over 12 GPM at 100 PSI). • Supports over 5000 HP gas, 2500 HP methanol. • Type III hard coat anodize protects the 6061 T6 aircraft aluminum alloy housing. • Features removable ports with a 1.25” inlet and ORB-12 outlet port. • EFI applications require regulator P/N 13113. • Bracket (P/N 11705) and Cog Pulley (P/N 21109) sold separately. (see Accessories) Note: Electric Priming Kit available - P/N 17301 (see Accessories) Download Installation Instructions

11107 - Billet Hex Drive Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

Get the same unparalleled performance you get from our Billet Belt Drive Fuel Pump (P/N 11105), with the convenience of direct drive. The Hex Drive Fuel Pump can be mounted and driven directly from the back of a properly prepared external oil pump or driven directly by the cam through a timing cover adapter. Designed to solve fuel delivery problems in high horsepower, forced-induction EFI applications, as well as the now popular, carbureted applications on gas or methanol. • Utilizes standard, 3/8” hex drive shaft and adjustable, billet mounting collar with standard 3-bolt mounting pattern and hardware. • Proven performance, powering some of the world’s fastest EFI vehicles. • Supports up to 3600 HP gas, 1800 HP methanol. • Compact size facilitates easy mounting. • Billet aluminum CNC-machined body, not “cast”. • ORB-10 inlet and outlet ports. • For EFI applications use regulator P/N 13113. • Carbureted gasoline applications require regulator P/N 13202 or P/N 13212. • Alcohol applications require Double Adjustable Regulator P/N 13209 or 13214. Note: Electric Priming Kit available - P/N 17301 (see Accessories) Download Installation Instructions

11105 - Billet Belt Drive Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

Zero amperage draw, less weight, and more flow! The Aeromotive Billet Belt Drive Fuel Pump was designed to solve fuel delivery problems in high horsepower, forced-induction EFI applications, as well as the now popular, carbureted applications on gas or methanol. • Proven performance, powering some of the world’s fastest EFI vehicles. • Supports up to 3600 HP gas, 1800 HP methanol. • Compact size facilitates easy mounting. • Billet aluminum CNC-machined body, not “cast”. • ORB-10 inlet and outlet ports. • For EFI applications use regulator P/N 13113. • Carbureted gasoline applications require regulator P/N 13202 or P/N 13212. • Alcohol applications require Double Adjustable Regulator P/N 13209 or 13214. • Bracket and Cog Pulley sold separately. (see Accessories) • Available as a kit (P/N 17140) includes: Pump, Bracket and Pump Pulley. Note: Electric Priming Kit available - P/N 17301 (see Accessories) Download Installation Instructions

11104 - Eliminator Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

This continuous duty “street warrior” supports big horsepower and maintains the drivability necessary for a true high performance street car. Designed for high horsepower street/strip applications, EFI or Carbureted, it features our “dual chamber” pumping mechanism. Fuel Injected Engines: up to 1900 HP - naturally aspirated up to 1400 HP - forced air induction Carbureted Engines: up to 2300 HP - naturally aspirated up to 1700 HP - forced air induction • ORB-12 inlet port and ORB-10 outlet port. • For EFI applications use regulator P/N 13110, carbureted P/N 13212. • Fully submersible for custom, in-tank placement. • 25% more flow at pressure than our A1000 Fuel Pump. • Perfect for “blow-through” carbureted engines up to 1700 HP. • Billet Speed Pump Controller (P/N 16306) required for EFI street applications. Download Installation Instructions

11103 - Tsunami Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

Compact, quiet and durable, these billet, in-line pumps are ideal for low to medium HP applications. Perfect for street rods and muscle cars, fuel injected or carbureted. Fuel Injected Engines: up to 700 HP - naturally aspirated up to 500 HP - forced air induction Carbureted Engines: up to 900 HP - naturally aspirated up to 700 HP - forced air induction • ORB-8 inlet ports and ORB-6 outlet ports. • Durable pumping components that simply don’t wear out. • Compact size facilitates easy mounting. • For EFI applications use regulator P/N 13101 or P/N 13109. • For Carbureted applications use regulator P/N 13204 or P/N 13301. • Fully submersible for custom, in-tank placement. Download Installation Instructions

11106 - 700 HP Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

11102 - Pro Series Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

Designed for crazy horsepower, its hard to find a more powerful, higher flowing, in-line fuel pump anywhere. Engineered for high-horsepower racing engines, this beautiful pump features our innovative “dual chamber” pump design. Fuel injected engines: up to 2200 HP - naturally aspirated up to 1700 HP - forced air induction Carbureted engines: Up to 2600 HP - naturally aspirated Up to 2000 HP - forced air induction • ORB-12 inlet and outlet ports. • Beautifully plated with our electroless nickel process. • Two ORB-12 / AN-12 Male adapter fittings included. • For EFI use regulator P/N 13110, carbureted P/N 13202 or P/N 13212 • Perfect for “blow-through” carbureted engines up to 2000 HP. • Fully submersible for custom, in-tank placement. • Billet Speed Pump Controller (P/N 16302) required for EFI street applications. Download Installation Instructions

11101 - A1000 Fuel Pump

Tue, 07 Sep 2010 08:51:41 +0000

This is the pump that started it all. Durable, reliable, good looking and it supports high horsepower. Perfect for the daily driver that doesnʼt run like a daily driver. Fuel Injected Engines: up to 1300 HP - naturally aspirated up to 1000 HP - forced air induction Carbureted Engines: up to 1500 HP - naturally aspirated up to 1200 HP - forced air induction • ORB-10 inlet and outlet ports. • For EFI applications use regulator P/N 13101 or P/N 13109. • For carbureted applications use regulator P/N 13204. • Fully submersible for custom, in-tank placement. • Perfect for “blow-through” carbureted engines up to 1200 HP. • Billet Speed Pump Controller (P/N 16302) recommended for EFI street applications. Download Installation Instructions